Bedienungsanleitung Garmin GPSMAP 700 (Seite 73 von 100) (Englisch)

522239

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

GPSMAP 700 Series Owner’s Manual 69

Radar

Front-of-boat Offset

The front-of-boat offset compensates for the physical location of the radar scanner on a boat, if the radar

scanner does not align with the bow-stern axis.

Measuring the Potential Front-of-boat Offset

1. Using a magnetic compass, take an optical bearing of a stationary target located within viewable range.

2. Measure the target bearing on the radar.

3. If the bearing deviation is more than +/- 1°, set the front-of-boat offset.

Setting the Front-of-boat Offset

Before you can set the front-of-boat offset, you must measure the potential front-of-boat offset (see previous

procedure).

The front-of-boat offset setting congured for use in one radar mode is applied to every other radar mode and

to the Radar Overlay.

1. From the Home screen, select  >  > .

2. Select and hold  or  to adjust the offset.

Radar Overlay Display Appearance

Showing Tracks on the Radar Overlay

You can set whether vessel tracks appear on the Radar Overlay.

From the Home screen, select  >  >  >  >  > .

Selecting a Waypoint Label Type

You can select the type of labels shown with waypoints on the Radar Overlay.

1. From the Home screen, select  >  >  >  > 

.

2. Select a waypoint.

3. Complete an action:

• Select  to identify waypoints using labels.

• Select  to show comments as waypoint labels.

• Select  to identify waypoints using symbols.

Showing Other Vessels on the Radar Overlay

AIS requires the use of an external AIS device and active transponder signals from other vessels.

You can congure how other vessels appear on the Radar Overlay. The display range setting congured for the

Radar Overlay is applied only to the Radar Overlay. The details and projected heading settings congured for

the Radar Overlay are also applied to all radar modes.

1. From the Home screen, select  >  >  >  > .

2. Complete an action:

• Select  to indicate the distance from your location in which AIS vessels appear, and

select a distance.

• Select  >  to show details about AIS-activated vessels.

• Select  to set the projected heading time for AIS-activated vessels, and select .

• Select  to show the tracks of AIS vessels, and select the length of the track that appears using a

trail.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 700 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info