Bedienungsanleitung Garmin GPSMAP 7000 (Seite 111 von 136) (Englisch)

501967

111

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

GPSMAP

6000/7000 Series Owner’s Manual 105

Sonar

Showing the A-Scope

The A-Scope is a vertical asher along the right side of the screen that instantaneously shows the range to

targets along a scale.

1. From the Home screen, select .

2. Select a sonar view.

3. Select 

4. Select an option:

• For the GSD 22, select .

• For the GSD 24/26, select .

5. Select >.

6. For the GSD 24/26, select a peak hold time.

Showing Overlay Numbers

Before you can show water-speed information, you must have a water-speed sensor or a speed-capable

transducer installed and connected. Before you can show water-temperature information, you must have a

water-temperature sensor or a temperature-capable transducer installed and connected.

You can show information, such as unit voltage and navigation information, on the sonar screens. The

navigation information always includes GPS speed and GPS heading, and includes bearing and off-course

information while navigating.

1. From the Home screen, select .

2. Select a sonar view.

3. Select 

4. Select an option:

• For the GSD 22, select .

• For the GSD 24/26, select .

5. Select .

6. Select an option for each data type.

If you select , and if the transducer is capable, the chartplotter displays the data on the sonar screen.

Conguring the Appearance of Suspended Targets

: This feature is available only on the GSD 22.

You can set how the sonar interprets suspended targets.

1. From the Home screen, select  >  >  > .

2. Complete an action:

• Select to show suspended targets as symbols with background sonar information.

• Select to show suspended targets as symbols with background sonar information and target depth

information.

• Select to show suspended targets as symbols.

• Select to show suspended targets as symbols with target depth information.

Showing and Conguring the Whiteline

: This feature is available only on the GSD 22.

You can highlight the strongest signal from the bottom to help dene the hardness or softness of the signal.

1. From the Home screen, select  >  >  > .

2. Complete an action:

• Select  to turn on the whiteline with the most-sensitive setting. Almost all strong returns are

highlighted in white.

• Select  to turn on the whiteline with many strong returns highlighted in white.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 7000 Seite 111

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 7000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info