Bedienungsanleitung Garmin GPSMAP 7000 (Seite 114 von 136) (Englisch)

501967

114

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

108 GPSMAP

6000/7000 Series Owner’s Manual

Sonar

1. Measure the keel offset, based on the location of the transducer:

• If the transducer is installed at the water

line, measure the distance from the

transducer location to the keel of the boat.

Enter this value in step 3 as a positive

number.

• If the transducer is installed at the bottom

of the keel, measure the distance from the

transducer to the water line. Enter this value

in step 3 as a negative number.

2. From the Home screen, select  > 

 > .

3. Enter the keel offset measured in step 1:

• For the GPSMAP 6000 series, use the  or the  to enter the distance measured

in step 1. Ensure that you enter a positive or a negative number based on the location of the transducer.

• For the GPSMAP 7000 series, use the on-screen keyboard to enter the distance measured in step 1.

Ensure that you enter a positive or a negative number based on the location of the transducer.

4. Select .

Setting the Water Temperature Offset

You must have a water-temperature sensor or a temperature-capable transducer.

The temperature offset compensates for the temperature reading from a temperature sensor.

1. Measure the water temperature using the temperature sensor or temperature-capable transducer that is

connected to the chartplotter.

2. Measure the water temperature using a different temperature sensor or thermometer that is known to be

accurate.

3. Subtract the water temperature measured in step 1 from the water temperature measured in step 2.

This is the temperature offset. Enter this value in step 5 as a positive number if the sensor connected to the

chartplotter measures the water temperature as being colder than it actually is. Enter this value in step 5

as a negative number if the sensor connected to the chartplotter measures the water temperature as being

warmer than it actually is.

4. From the Home screen, select  >  > .

5. Enter the temperature offset calculated in step 3:

• For the GPSMAP 6000 series, use the  or the  to enter the temperature offset.

• For the GPSMAP 7000 series, use the on-screen keyboard to enter the temperature offset.

6. Select .

Adjusting the Transducer Settings

: These features are available only on the GSD 24 and GSD 26.

1. From the Home screen, select .

2. Select a sonar view.

3. Select  >  > 

4. Select one or more options:

• Select  to help reduce self-interference. You can increase the transmit rate to speed up

the scroll speed, but this might also create self-interference.

• Select to reduce transducer ringing near the surface. Lower the Transmit Power to

reduce the ringing.

• Select to dene the edges of the target. A shorter lter will dene the edges of the targets.

Longer lters will create softer target edges, but may reduce noise.

• Select  to view details of the transducer.

Transducer at the water

line

A (+) positive number

shows depth at the bottom

of the keel.

Transducer at the bottom

of the keel

A (-) negative number

shows depth at the surface.

Keel Offset

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 7000 Seite 114

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 7000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info