Bedienungsanleitung Garmin GPSMAP 721 (Seite 43 von 100) (Englisch)

501971

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

GPSMAP 700 Series Owner’s Manual 39

Almanac, On-boat, and Environmental Data

Setting Description

Scale minimum This value is less than the rated minimum, and it represents the lower limit of the gauge.

This setting is not available on all gauges.

Scale maximum This value is greater than the rated maximum, and it represents the upper limit of the

gauge. This setting is not available on all gauges.

Rated minimum Represents the minimum value of the standard operating range.

Rated maximum Represents the maximum value of the standard operating range.

1. From the Home screen, select  >  >  >  >  >

.

2. Select a gauge.

3. Select  >  > .

4. Select the gauge limit you want to set (, , , or ).

 Some of these options may not be available for all gauges.

5. Select the gauge limit.

6. Repeat steps 4 and 5 to set additional gauge limits.

Activating Status Alarms for Engine Gauges and Fuel Gauges

If you have activated gauge status alarms, when the engine sends a warning status message over the NMEA

2000 network, a gauge status alarm message appears. The gauge face or bar may become red depending on the

alarm type.

From the Home screen, select  >  >  >  >  >

 >.

Customizing Engine and Fuel Gauge Status Alarms

1. From the Home screen, select  >  >  >  >  >

 >.

2. Select one or more engine gauge or fuel gauge alarms that you want to turn on or off.

3. Select .

Selecting the Number of Engines Shown in Gauges

The engine gauges can show information for up to four engines.

1. From the Home screen, select  >  >  >  >  >

 > .

2. Select the number of engines.

3. Complete an action:

• Select .

• Select  and complete steps 2 through 5 of “Selecting the Engines Shown in Gauges”

(page 39) to select the engines for which information appears in the gauges.

Selecting the Engines Shown in Gauges

You must manually select the number of engines shown in the engine gauges (page 39) before you can select

the engines for which information appears in the gauges.

1. From the Home screen, select  >  >  >  >  >

 > .

2. Select .

3. Select the number of the engine for which you want to view information in the rst gauge or bar.

For example, if you select “3,” the rst engine bar shows information for the engine identied as

“Engine3” on the NMEA 2000 network.

4. Repeat step 3 for the second, third, and fourth engine bar, as needed.

5. Select .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 721 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 721

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info