Bedienungsanleitung Garmin GPSMAP 721 (Seite 54 von 100) (Englisch)

501971

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

50 GPSMAP 700 Series Owner’s Manual

Device Conguration

4. Complete an action:

• Select  > .

• Select  > .

• Select .

5. Select .

Using the Speed Filter

The speed lter averages the speed of your boat over a short period of time for smoother speed values.

1. From the Home screen, select  >  > .

2. Complete an action:

• Select  >  to keep the speed lter on continuously, enter the speed lter time duration

and select .

• Select  >  to allow the unit to provide the optimal performance as required by your

situation, such as traveling at a constant speed or frequently changing speeds.

Other Vessels

You can show and congure information about other vessels for the Navigation chart, the Fishing chart,

Perspective 3D, or Mariner’s Eye 3D.

: To congure Automatic Identication System (AIS) information for other vessels, your chartplotter

must be connected to an external AIS device.

Viewing a List of AIS Targets

See “Viewing a List of AIS Targets” (page 15).

Conguring the Appearance of Other Vessels

: The Mariner’s Eye 3D chart is available if you use a BlueChart g2 Vision SD card. The Fishing chart

is available if you use a BlueChart g2 Vision SD card or a BlueChart g2 SD card, or if your built-in map

supports Fishing charts.

1. From the Home screen, select .

2. Select , , , or .

3. Select  > > .

4. Complete an action:

• Select  to view a list of AIS targets (page 12).

• Select  to view a log of the most-recent DSC calls and other DSC contacts you have entered

(page 79).

• Select  to congure how AIS vessels are shown on a chart (page 14).

• Select  to show the tracks of DSC vessels, and select the length of the track that appears

using a trail (page 82).

• Select  to set up a safe-zone collision alarm for AIS vessels (page 15).

Information about Your Boat

Calibrating a Water Speed Device

If you have a speed-sensing transducer, you can calibrate that speed-sensing device.

1. From the Home screen, select  >  > .

2. Follow the on-screen instructions.

 If the boat is not moving fast enough or the speed sensor is not registering a speed, a “Speed too

low” message appears. Select , and safely increase the boat speed. If the message appears again, stop

the boat, and ensure that the speed-sensor wheel is not stuck. If the wheel turns freely, check the cable

connections. If you continue to get the message, contact Garmin Product Support.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 721 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 721

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info