Bedienungsanleitung Garmin GPSMAP 721 (Seite 84 von 100) (Englisch)

501971

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

80 GPSMAP 700 Series Owner’s Manual

Digital Selective Calling

Adding a DSC Contact

You can add a vessel to your DSC list. You can make calls to a DSC contact from the chartplotter (page 83).

1. From the Home screen, select  >  > > .

2. Enter the Maritime Mobile Service Identity (MMSI) of the vessel.

3. Select .

4. Enter the name of the vessel.

5. Select .

Incoming Distress Calls

If your Garmin chartplotter and VHF radio are connected using NMEA 0183 or NMEA 2000, your chartplotter

alerts you when your VHF radio receives a DSC distress call. If position information was sent with the distress

call, that information is also available and recorded with the call.

The symbol designates a distress call in the DSC list and marks the position of the vessel on the

Navigation chart at the time when the DSC distress call was sent.

Viewing the DSC Distress Call Report

See “Viewing a Position Report” (page 81).

Calling a Vessel in Distress

See “Making an Individual Routine Call” (page 83).

Navigating to a Vessel in Distress

The symbol designates a distress call in the DSC list and marks the position of a vessel on the Navigation

chart at the time a DSC distress call is sent.

See “Navigating to a Tracked Vessel” (page 81).

Creating a Waypoint at the Position of a Vessel in Distress

See “Creating a Waypoint at the Position of a Tracked Vessel” (page 81).

Editing Information in a DSC Call Report

See “Editing Information in a Position Report” (page 81).

Deleting a DSC Call Report

See “Deleting a Position Report” (page 81).

Man-Overboard Distress Calls Initiated from a VHF Radio

When your Garmin chartplotter is connected to a Garmin NMEA 2000-compatible radio, and you initiate a

man-overboard DSC distress call from your radio, your Garmin chartplotter shows the man-overboard screen

and prompts you to navigate to the man-overboard point. If you have a Garmin autopilot system connected to

the network, your chartplotter prompts you to start a Williamson’s turn to the man-overboard point.

If you cancel the man-overboard distress call on the radio, the chartplotter screen prompting you to activate

navigation to the man-overboard location disappears.

Man-Overboard Distress Calls Initiated from the Chartplotter

When your Garmin chartplotter is connected to a Garmin NMEA 2000-compatible radio and you activate

navigation to a man-overboard location, the radio shows the Distress Call page so you can quickly initiate a

man-overboard distress call.

On the radio, press the  key for at least three seconds to send the distress call.

For information on placing distress calls from your radio, see your Garmin VHF Radio Owner’s Manual. You

can mark an MOB and navigate to it (page 27).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 721 Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 721

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info