Bedienungsanleitung Garmin GPSMAP 740 (Seite 9 von 100) (Englisch)

501972

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

GPSMAP 700 Series Owner’s Manual 5

Charts and 3D Chart Views

Chart Symbols

BlueChart g2 and BlueChart g2 Vision charts use graphic symbols to denote map features, which follow the

standards for US and international charts. Some other common symbols you might see include, but are not

limited to, those shown below.

Icon Description Icon Description Icon Description

Current station Marine services Overhead photo

available

Information Tide station Perspective photo

available

Other features common to most charts include depth contour lines (with deep water represented in white),

intertidal zones, spot soundings (as depicted on the original paper chart), navigational aids and symbols,

obstructions, and cable areas.

Navigating to a Point on the Chart



CAUTION

The Auto Guidance feature of the BlueChart g2 Vision data card is based on electronic chart information. That

data does not ensure obstacle and bottom clearance. Carefully compare the course to all visual sightings and

avoid any land, shallow water, or other obstacles that may be in your path.

When using Go To, a direct course and a corrected course may pass over land or shallow water. Use visual

sightings and steer to avoid land, shallow water, and other dangerous objects.

: The Fishing chart is available if you use a BlueChart g2 Vision SD card or a BlueChart g2 SD card, or

if your built-in map supports Fishing charts.

1. From the Home screen, select .

2. Select  or .

3. Touch the chart to select the location using the cursor ( ).

4. Select .

5. Complete an action:

• Select  to navigate directly to the location.

• Select  to create a route to the location, including turns (page 28).

• Select  to use Auto Guidance (page 21).

6. Review the course indicated by the magenta line.

: When using Auto Guidance, a gray segment within any part of the magenta line indicates that Auto

Guidance cannot calculate part of the Auto Guidance line. This is due to the settings for minimum safe

water depth and minimum safe obstacle height (page 46).

7. Follow the magenta line, steering to avoid land, shallow water, and other obstacles.

Panning the Navigation Chart, Fishing Chart, or Radar Overlay

You can pan away from your present location and to other areas on the Navigation chart, the Fishing chart, or

the Radar Overlay.

: The Fishing chart is available if you use a BlueChart g2 Vision SD card or a BlueChart g2 SD card,

or if your built-in map supports Fishing charts. The radar overlay is available when connected to a compatible

radar.

1. From the Home screen, select .

2. Select , , or .

3. Touch and drag the Navigation screen to pan the map.

When you pan past the edge of the map, the screen scrolls forward to provide continuous map coverage.

4. Select  to stop panning and return the screen to your present location.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 740 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 740

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info