Bedienungsanleitung Garmin GPSMAP 740 (Seite 20 von 100) (Englisch)

501972

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

16 GPSMAP 700 Series Owner’s Manual

Charts and 3D Chart Views

Adjusting the View

• Select to move the view closer to your boat and lower to the water.

• Select to move the view away from the boat.

The scale ( ) is momentarily indicated at the bottom of the screen.

Panning the Perspective 3D, Mariner’s Eye 3D, or Fish Eye 3D Views

You can pan around your present location on the Perspective 3D, Mariner’s Eye 3D, or Fish Eye 3D Views.

: Mariner’s Eye 3D and Fish Eye 3D chart views are available only if you use a BlueChart g2 Vision

SD card (page 16).

1. From the Home screen, select .

2. Select , , or .

3. Touch and drag the screen to the left or right to rotate the 3D view.

4. Select  to stop panning and return the screen to your present location.

Perspective 3D and Mariner’s Eye 3D Chart Appearance

Showing Range Rings

The range rings help you to visualize distances in Perspective 3D or Mariner’s Eye 3D.

: Mariner’s Eye 3D is available with a preprogrammed BlueChart g2 Vision data card.

1. From the Home screen, select .

2. Select  or .

3. Select  >  >  > .

Selecting a Lane Width

The navigation lane is the magenta line in Perspective 3D or Mariner’s Eye 3D view that indicates the course

to your destination while you are navigating. You can specify the width of the navigation lane.

: Mariner’s Eye 3D is available with a preprogrammed BlueChart g2 Vision data card.

1. From the Home screen, select .

2. Select  or .

3. Select  >  > .

4. Enter the width.

5. Select .

Showing Other Vessels

See “Conguring the Appearance of Other Vessels” (page 50).

Showing and Conguring Data Overlay

See “Overlay Numbers” (page 48).

Using Waypoints and Tracks

See “Waypoints” (page 26) or “Tracks” (page 30).

BlueChart g2 Vision

An optional, preprogrammed BlueChart g2 Vision data card allows you to get the most out of your chartplotter.

In addition to detailed marine charting, BlueChart g2 Vision has the following features:

•  (page 17)—provides a view from above and behind the boat for a three-dimensional

navigation aid. The BlueChart g2 Vision Mariner’s Eye 3D is more detailed than the pre-loaded data.

•  (page 18)—provides an underwater, three-dimensional view that visually represents the

sea oor according to the information on the chart.

•  (page 19)—shows the chart with enhanced bottom contours and without navigational data.

This chart works well for offshore deep-sea shing.

•  (page 20)—provides high-resolution satellite images for a realistic

view of the land and water on the Navigation chart.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 740 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 740

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info