Bedienungsanleitung Garmin GPSMAP 7416 (Seite 5 von 8) (Englisch)

657694

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

connecting video input and output sources, observe these

considerations.

• The chartplotter may have one composite-video input port

labeled CVBS IN or two composite-video input ports labeled

VIDEO 1 and VIDEO 2.

◦ The composite-video ports use BNC connectors. You can

use a BNC to RCA adapter to connect a composite-video

source with RCA connectors to these ports.

◦ The video from sources connected to these ports is

available only for display on the device or on an additional

monitor connected to the device. Composite video is not

shared across the Garmin Marine Network or NMEA 2000

network.

• The chartplotter may have one DVI-D video output port. You

can connect a DVI-D or DVI-I cable to the port to view a

mirror image of the screen on a computer monitor or HD TV.

◦ If your device includes a DVI cable connector, a rubber

gasket is included. This gasket must be installed between

the DVI port and cable connector to avoid damage to the

connector.

◦ If needed, you can use a DVI-D to HDMI

adapter to

connect to an HD TV or other HDMI compatible display.

◦ Although it is recommended to use DVI cables sold by

Garmin, high-quality third-party DVI cables may be used.

You should test the DVI cable by connecting the devices

before routing the cable.

J1939 Engine Network Connection Considerations

NOTICE

You must use a Garmin GPSMAP J1939 accessory cable when

connecting the chartplotter to the J1939 engine network to

prevent corrosion due to moisture. Using a different cable voids

your warranty.

If you have an existing engine network on your boat, it should

already be connected to power. Do not add any additional power

supply.

This chartplotter can connect to an engine network on your boat

to read data from compatible devices such as certain engines.

The engine network follows a standard and uses proprietary

messages.

You should connect only one chartplotter to one engine network.

Connecting more than one chartplotter to one engine network

may result in unexpected behavior.

The port labeled J1939 is used to connect the device to the

existing engine network. You must route the cable within 6 m

(20 ft.) of the engine network backbone.

The Garmin GPSMAP J1939 accessory cable requires

connection to a power source and proper termination. For more

information on connecting to your engine network, see the

manufacturer's engine documentation.

Pin Wire Color Description

Bare Shield

Red Power, positive

Black Power, negative

White CAN High

Blue CAN Low

Specifications

Physical Specifications

Device Specification Measurement

All models Temperature range From -15° to 55°C (5° to

131°F)

Material Die-cast aluminum and

polycarbonate plastic

Water rating* IEC 60529 IPX7

Seven-inch

models

Dimensions (W × H ×

222 × 142 × 66 mm (8.75 ×

5.6 × 2.6 in.)

Display size (W × H) 155 × 86 mm (6.1 × 3.4 in.)

Weight 1.13 kg (2.5 lbs)

Eight-inch

models

Dimensions (W × H ×

244 × 160 × 76 mm (9.6 ×

6.3 × 3.0 in.)

Display size (W × H) 178 × 102 mm (7.0 × 4.0 in.)

Weight 1.41 kg (3.1 lbs)

Ten-inch

models

Dimensions (W × H ×

290 × 206 × 79 mm (11.4 ×

8.1 × 3.1 in.)

Display size (W × H) 218 × 135 mm (8.6 × 5.3 in.)

Weight 2.36 kg (5.2 lbs)

Twelve-inch

models

Dimensions (W × H ×

330 × 226 × 79 mm (13.0 ×

8.9 × 3.1 in.)

Display size (W × H) 262 × 163 mm (10.3 ×

6.4 in.)

Weight 2.72 kg (6.0 lbs)

Sixteen-inch

models

Dimensions (W × H ×

426 × 275 × 88 mm (16.76 ×

10.81 × 3.45 in.)

Display size (W × H) 344 × 193 mm (13.55 ×

7.62 in.)

Weight 4.3 kg (9.5 lbs)

*The device withstands incidental exposure to water of up to 1 m

for up to 30 min. For more information, go to www.garmin.com

/waterrating.

Electrical Specifications

Device Specification Measurement

All models Input power From 10 to 32 Vdc

NMEA 2000 LEN 2

NMEA 2000 Draw 75 mA max.

Seven-inch models Max. power usage at

10 Vdc

24 W

Typical current draw at

12 Vdc

1.5 A

Max. current draw at

12 Vdc

2.0 A

Fuse 6 A, 125 V fast-acting

Compass-safe distance 800 mm (31.5 in.)

Eight-inch models Max. power usage at

10 Vdc

27 W

Typical current draw at

12 Vdc

1.8 A

Max. current draw at

12 Vdc

2.3 A

Fuse 6 A, 125 V fast-acting

Compass-safe distance 700 mm (27.6 in.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 7416 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 7416

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info