Bedienungsanleitung Garmin GPSMAP 751 (Seite 18 von 100) (Englisch)

501975

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

14 GPSMAP 700 Series Owner’s Manual

Charts and 3D Chart Views

➎

➐

➏

Target with Projected Course and Heading

Turning Off AIS Reception

AIS signal reception is turned on by default.

From the Home screen, select  >  >  > .

All AIS functionality on all charts and on all 3D chart views is disabled. This includes AIS vessel targeting

and tracking, collision alarms that result from AIS vessel targeting and tracking, and information about AIS

vessels.

Enabling AIS-SART Transmission Test Alerts

In order to avoid a large number of test alerts and symbols in crowded areas such as marinas, AIS-SART test

alerts ignored by default. To test an AIS SART device, you must enable the chartplotter to receive test alerts.

From the Home screen, select  >  > .

Showing AIS Vessels on a Chart or on a 3D Chart View

AIS requires the use of an external AIS device and active transponder signals from other vessels.

You can congure how other vessels appear on a chart or on a 3D chart view. The display range congured

for one chart or one 3D chart view is applied only to that chart or to that 3D chart view. The details, projected

heading, and trails settings congured for one chart or one 3D chart view are applied to all charts and to all 3D

chart views.

: The Mariner’s Eye 3D chart is available if you use a BlueChart g2 Vision SD card. The Fishing chart

is available if you use a BlueChart g2 Vision SD card or a BlueChart g2 SD card, or if your built-in map

supports Fishing charts.

1. From the Home screen, select .

2. Select , , , or .

3. Select  >  > .

4. Complete an action:

• Select  to indicate the distance from your location within which AIS vessels appear.

Select a distance or select .

• Select  >  to show details about AIS-activated vessels.

• Select , enter the projected heading time for AIS-activated vessels, and select .

• Select  to show the tracks of AIS vessels, and select the length of the track that appears using a

trail.

Activating a Target for an AIS Vessel

1. From the Home screen, select .

2. Select , , , or .

3. Touch an AIS vessel.

4. Select  > .

Viewing Information about a Targeted AIS Vessel

You can view the AIS signal status, MMSI, GPS speed, GPS heading, and other information that is reported

about a targeted AIS vessel.

1. From the Home screen, select .

2. Select , , , or .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 751 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 751

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info