Bedienungsanleitung Garmin GPSMAP 7607 (Seite 54 von 62) (Englisch)

657691

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Select Settings

> My Vessel > Temp. Offset

Enter the temperature offset calculated in step 3.

Calibrating a Water Speed Device

If you have a speed-sensing transducer connected to the

chartplotter, you can calibrate that speed-sensing device to

improve the accuracy of water-speed data displayed by the

chartplotter.

Select Settings

> My Vessel > Calibrate Water Speed

Follow the on-screen instructions.

If the boat is not moving fast enough or the speed sensor is

not registering a speed, a message appears.

Select

OK, and safely increase the boat speed.

If the message appears again, stop the boat, and ensure the

speed-sensor wheel is not stuck.

If the wheel turns freely, check the cable connections.

If you continue to get the message, contact Garmin product

support.

Other Vessels Settings

When your compatible chartplotter is connected to an AIS

device or VHF radio, you can set up how other vessels are

displayed on the chartplotter.

Select

Settings

> Other Vessels

AIS: Enables and disables AIS signal reception.

DSC: Enables and disables digital selective calling (DSC).

Collision Alarm: Sets the collision alarm (Setting the Safe-Zone

Collision Alarm,

page

7).

AIS-EPIRB Test: Enables test signals from Emergency Position

Indicating Radio Beacons (EPRIB).

AIS-MOB Test: Enables test signals from man overboard (MOB)

devices.

AIS-SART Test: Enables test transmissions from Search and

Rescue Transponders (SART).

Settings that are Synced on the Garmin

Marine Network

The following devices sync certain settings when connected to

the

Garmin Marine Network.

• echoMAP

™

70 series

• GPSMAP 507 series (software version 3.0 or later)

• GPSMAP 701 series (software version 3.0 or later)

• GPSMAP 702 series

• GPSMAP 800 series

• GPSMAP 902 series

• GPSMAP 1000 series

• GPSMAP 1002 series

• GPSMAP 1202 series

• GPSMAP 7400/7600 series

• GPSMAP 8400/8600 series

The following settings are synced, if applicable, to the device.

Alarm Settings (also syncs alarm acknowledgment):

• Arrival

• Anchor Drag

• Off Course

• GPS Accuracy

• Shallow Water

• Deep Water

(Not available in the GPSMAP 8400/8600

series)

• Water Temp.

• Contour (Not available in echoMAP 70s and GPSMAP

507/701 series)

• Fish

• Collision Alarm

General Settings:

• Auto Guidance

Preferred Depth

• Auto Guidance Vertical Clearance

• Beeper

• Color Mode

• Keyboard Layout

• Language

• Map Datum

• North Reference

• Position Format

• System Units

• Calibrate Water Speed

• Radar Antenna Size

Chart Settings:

• Chart Borders

• Hazard Colors

• Heading Line

• Land POIs

• Light Sectors

• Navaid Size

• Navaid Type

• Photo Points

• Preferred Depth

• Shallow Shading

• Service Points

• Vessel Icon (Cannot be synced between all models)

Restoring the Original Chartplotter Factory

Settings

NOTE:

This procedure deletes all settings information you have

entered.

Select Settings >

System > System Information > Factory

Settings

Select an option.

Communication with Wireless Devices

The chartplotters can create a wireless network to which you

can connect wireless devices.

Connecting wireless devices allows you to use Garmin apps,

including BlueChart

Mobile and Garmin Helm

™

. See

www.garmin.com for more information.

Wi‑Fi

Network

Setting Up the Wi‑Fi

Wireless Network

The chartplotters can create a Wi‑Fi

network to which you can

connect wireless devices. The first time you access the wireless

network settings, you are prompted to set up the network.

Select Settings > Communications

> Wi-Fi® Network >

Wi-Fi® > On > OK

If necessary, enter a name for this wireless network.

Enter a password.

You will need this password to access the wireless network

from a wireless device. The password is case-sensitive.

46 Communication with Wireless Devices

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 7607 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 7607

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info