Bedienungsanleitung Garmin GPSMAP 7607 (Seite 57 von 62) (Englisch)

657691

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Insert a memory card with image files into the card slot.

Select Info >

Image Viewer

Select the folder containing the images.

Wait a few seconds for the thumbnail images to load.

Select an image.

Use the arrows to scroll through the images.

If necessary, select Menu >

Start Slideshow

Screenshots

You can capture a screenshot of any screen shown on your

chartplotter as a bitmap (.bmp) file. You can transfer the

screenshot to your computer. You can also view the screenshot

in the image viewer (

Viewing Images on a Memory card,

page 48)

Capturing Screenshots

Insert a memory card into the card slot.

Select Settings > Preferences >

Screenshot Capture >

Go to a screen you want to capture.

Hold

Home for at least six seconds.

Copying Screenshots to a Computer

Remove the memory card from the chartplotter, and insert it

into a card reader that is attached to a computer.

From

Windows

Explorer, open the Garmin\scrn folder on the

memory card.

Copy a .bmp file from the card and paste it to any location on

the computer.

Troubleshooting

My device will not acquire GPS signals

If the device is not acquiring satellite signals, there could be a

few causes. If the device has moved a large distance since the

last time it has acquired satellites or has been turned off for

longer than a few weeks or months, the device may not be able

to acquire the satellites correctly.

• Ensure the device is using the latest software. If not, update

the device software (Software Update, page 2).

• Make sure the device has a clear view of the sky so the

antenna can receive the GPS signal. If it is mounted inside of

a cabin, it should be close to a window so it can receive the

GPS signal.

• If the device is using an external GPS antenna, make sure

the antenna is connected to the chartplotter or the NMEA

network.

• If the device has more than one GPS antenna source, select

a different source (Selecting the GPS Source, page 2)

My device will not turn on or keeps turning off

Devices erratically turning off or not turning on could indicate an

issue with the power supplied to the device. Check these items

to attempt to troubleshoot the cause of the power issue.

• Make sure the power source is generating power.

You can check this several ways. For example, you can

check whether other devices powered by the source are

functioning.

• Check the fuse in the power cable.

The fuse should be located in a holder that is part of the red

wire of the power cable. Check that the proper size fuse is

installed. Refer to the label on the cable or the installation

instructions for the exact fuse size needed. Check the fuse to

make sure there is still a connection inside of the fuse. You

can test the fuse using a multimeter. If the fuse is good, the

multimeter reads 0 ohm.

• Check to make sure the device is receiving is at least 10 V,

but 12 V is recommended.

To check the voltage, measure the female power and ground

sockets of the power cable for DC voltage. If the voltage is

less than 10 V, the device will not turn on.

• If the device is receiving enough power but does not turn on,

contact Garmin product support at support.garmin.com.

My device is not creating waypoints in the correct

location

You can manually enter a waypoint location to transfer and

share data from one device to the next. If you have manually

entered a waypoint using coordinates, and the location of the

point does not appear where the point should be, the map

datum and position format of the device may not match the map

datum and position format originally used to mark the waypoint.

Position format is the way in which the GPS receiver's position

appears on the screen. This is commonly displayed as latitude/

longitude in degrees and minutes, with options for degrees,

minutes and second, degrees only, or one of several grid

formats.

Map datum is a math model which depicts a part of the surface

of the earth. Latitude and longitude lines on a paper map are

referenced to a specific map datum.

Find out which map datum and position format was used

when the original waypoint was created.

If the original waypoint was taken from a map, there should

be a legend on the map that lists the map datum and position

format used to create that map. Most often this is found near

the map key.

Select Settings

> Preferences > Units

Select the correct map datum and position format settings.

Create the waypoint again.

Contacting Garmin Support

• Go to support.garmin.com for help and information, such as

product manuals, frequently asked questions, videos, and

customer support.

• In the USA, call 913-397-8200 or 1-800-800-1020.

• In the UK, call 0808 238 0000.

• In Europe, call +44 (0) 870 850 1241.

NMEA 2000 PGN Information

Type PGN Description

Transmit and receive 059392 ISO acknowledgment

059904 ISO request

060928 ISO address claim

126208 NMEA

: Command, request, and

acknowledge group function

126464 Transmit and receive PGN list group

function

126996 Product information

127250 Vessel heading

128259 Speed: Water referenced

128267 Water depth

129025 Position: Rapid update

129026 COG and SOG: Rapid update

129029 GNSS position data

129540 GNSS satellites in view

130306 Wind data

130312 Temperature

Transmit 127258 Magnetic variance

129283 Cross track error

Appendix 49

Garmin GPSMAP 7607 Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 7607

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info