Bedienungsanleitung Garmin GPSMAP 8000 serie (Seite 40 von 62) (Englisch)

522255

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Viewing the Gauges

Select A/V, Gauges, Controls.

Select a gauge.

Select or to view a different gauge page.

Changing the Data Shown in a Gauge

From a gauges screen, hold a gauge.

Select Replace Data.

Select a data type.

Select the data to display.

Customizing the Gauges

You can change the layout of the gauge pages, how the gauges

pages are displayed, and the data in each gauge.

Open a gauge page.

Select Menu

> Edit Gauge Pages

Select an option:

• To change the data shown in a gauge, select the gauge.

• To change the layout of the gauges on the page, select

Change Layout

• To add a page to this set of gauge pages, select Add

Page.

• To change the order of this page in the set of gauge

pages, select Move Page Left or

Move Page Right.

• To restore this page to the original view, select Restore

Default View.

Customizing Engine Gauge and Fuel Gauge Limits

You can configure the upper and lower limits and the range of

desired standard operation of a gauge.

NOTE:

Not all options are available for all gauges.

From an applicable gauges screen, select Menu >

Installation > Set Gauge Limits.

Select a gauge to customize.

Select an option:

• To set the minimum value of the standard operating

range, select Rated Min.

• To set the maximum value of the standard operating

range, select

Rated Max..

• To set the lower limit of the gauge lower than the rated

minimum, select

Scale Min..

• To set the upper limit of the gauge higher than the rated

maximum, select

Scale Max..

Select the limit value.

Repeat steps 4 and 5 to set additional gauge limits.

Viewing Engine and Fuel Gauges

Before you can view engine and fuel gauges, you must be

connected to a

NMEA 2000 network capable of sensing engine

and fuel data. See the installation instructions for details.

Select

A/V, Gauges, Controls > Engines.

Selecting the Number of Engines Shown in Gauges

You can show information for up to four engines.

From the engine gauges screen, select Menu > Installation

> Engine Selection > Number of Engines.

Select an option:

• Select the number of engines.

• Select Auto Configure to automatically detect the number

of engines.

Customizing the Engines Shown in Gauges

Before you can customize how the engines are shown in the

gauges, you must manually select the number of engines

(Selecting the Number of Engines Shown in Gauges, page 32).

From the engine gauges screen, select Menu > Installation

> Engine Selection

> Edit Engines

Select

First Engine.

Select the engine to display in the first gauge.

Repeat for the remaining engine bars.

Enabling Status Alarms for Engine Gauges

You can enable the chartplotter to display engine status alarms.

From the engine gauges screen, select Menu > Installation

> Status Alarms >

When an engine alarms is triggered, a gauge status alarm

message appears and the gauge may become red depending

on the type of alarm.

Enabling Some Engine Gauge Status Alarms

From the engine gauges screen, select Menu

> Installation

> Status Alarms > Custom

Select one or more engine gauge alarms to turn on or off.

Setting the Fuel Alarm

Before you can set a fuel level alarm, a compatible fuel flow

sensor must be connected to the chartplotter.

You can set an alarm to sound when the total amount of

remaining onboard fuel reaches the level you specify.

Select Settings

> Alarms > Fuel > Set Total Fuel Onboard

> On

Enter the remaining amount of fuel that triggers the alarm,

and select Done.

Setting the Fuel Capacity of the Vessel

Select Settings > My Vessel > Fuel Capacity.

Enter the combined total capacity of the fuel tanks.

Synchronizing the Fuel Data with the Actual Vessel

Fuel

You can synchronize the fuel levels in the chartplotter with the

actual fuel in the vessel when you add fuel to your vessel.

Select A/V, Gauges, Controls >

Engines > Menu

Select an option:

• After you have filled up all the fuel tanks on the vessel,

select Fill Up All Tanks. The fuel level is reset to

maximum capacity.

• After you have added less than a full tank of fuel, select

Add Fuel to Boat, and enter the amount added.

• To specify the total fuel in the vessel tanks, select

Set

Total Fuel Onboard, and enter the total amount of fuel in

the tanks.

Viewing the Wind Gauges

Before you can view wind information, you must have a wind

sensor connected to the chartplotter.

Select

A/V, Gauges, Controls > Wind.

Configuring the Sailing Wind Gauge

You can configure the sailing wind gauge to show true or

apparent wind speed and angle.

From the wind gauge, select Menu > Sailing Wind Gauge.

Select an option:

• To show true or apparent wind angle, select Needle

, and

select an option.

32 Gauges and Graphs

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 8000 serie Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 8000 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info