Bedienungsanleitung Garmin GPSMAP 820xs (Seite 13 von 46) (Englisch)

590108

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Laylines: Adjusts the laylines, when in sailing mode (Laylines

Settings).

Chart Setup: See Navigation and Fishing Chart Setup.

Overlay Numbers: See Overlay Numbers Settings. This might

appear in the Chart Setup menu.

Chart Appearance: See Chart Appearance Settings. This might

appear in the Chart Setup menu.

Navigation and Fishing Chart Setup

NOTE:

Not all settings apply to all charts and 3D chart views.

Some settings require external accessories or applicable

premium charts.

From the Navigation chart or Fishing chart, select

MENU >

Chart Setup.

Satellite Photos: Shows high-resolution satellite images on the

land or on both land and sea portions of the Navigation chart,

when certain premium maps are used Showing Satellite

Imagery on the Navigation Chart.

Water Overlay: Enables relief shading, which shows the

gradient of the bottom with shading, or sonar imagery, which

helps identify the density of the bottom. This feature is

available only with some premium maps.

Tides & Currents: Shows current station indicators and tide

station indicators on the chart Showing Tides and Current

Indicators and enables the tides and current slider, which

sets the time for which tides and currents are reported on the

map.

Roses: Shows a compass rose around your boat, indicating

compass direction oriented to the heading of the boat. A true

wind direction or apparent wind direction indicator appears if

the chartplotter is connected to a compatible marine wind

sensor. When in sailing mode, true and apparent wind are

shown on the wind rose.

Lake Level: Sets the present water level of the lake. This

feature is available only with some premium maps.

Overlay Numbers: See Overlay Numbers Settings.

Weather: Sets which weather items are shown on the chart,

when the chartplotter is connected to a compatible weather

receiver with an active subscription. Requires a compatible,

connected antenna and an active subscription.

Chart Appearance: See Chart Appearance Settings.

Waypoints and Tracks Settings on the Charts and

Chart Views

From a chart or a 3D chart view, select MENU > Waypoints &

Tracks.

Tracks: Shows tracks on the chart or 3D chart view.

Waypoints: Shows the list of waypoints (Viewing a List of all

Waypoints).

New Waypoint: Creates a new waypoint.

Waypoint Display: Sets how to display waypoints on the chart.

Active Tracks: Shows the active track options menu.

Saved Tracks: Shows the list of saved tracks (Viewing a List of

Saved Tracks).

Tracks Display: Sets which tracks to display on the chart based

on track color.

Laylines Settings

When in sailing mode (Setting the Vessel Type), you can display

laylines on the navigation chart. Laylines can be very helpful

when racing.

From the navigation chart, select MENU > Sailing

> Laylines

Display: Sets how the laylines and vessel are shown on the

chart, and sets the length of the laylines.

Sailing Ang.: Allows you to select how the device calculates

laylines. The Actual option calculates the laylines using the

measured wind angle from the wind sensor. The Manual

option calculates the laylines using manually entered

windward and leeward angles.

Tide Correction: Corrects the laylines based on the tide.

Overlay Numbers Settings

From a chart, 3D chart view, the Radar screen, or a

Combinations screen, select MENU > Overlay Numbers.

Edit Layout: Sets the layout of the data overlay, or data fields.

You can select the data to be shown within each data field.

Nav. Inset: Shows the navigation inset when the vessel is

navigating to a destination.

Navigation Inset Setup: Allows you to configure the navigation

inset to show

Route Leg Info, and to control when the inset

appears before a turn or destination.

Compass Tape: Shows the compass tape data bar when the

vessel is navigating to a destination.

Editing the Data Fields

You can change the data shown in the overlay numbers

displayed on the charts and other screens.

From a screen that supports overlay numbers, select MENU

If necessary, select

Chart Setup.

Select Overlay Numbers

> Edit Layout

Select a layout.

Select a data field.

Select the type of data shown in the field.

Available data options vary based on the chartplotter and

network configuration.

Showing a Navigation Inset

You can control whether a navigation inset appears on some

chart views. The navigation inset is shown only when the boat is

navigating to a destination.

From a chart or 3D chart view, select MENU.

If necessary, select Chart Setup.

Select Overlay Numbers >

Nav. Inset > Auto

Select Navigation Inset Setup.

Complete an action:

• To show waypoint velocity made good (VMG) when

navigating a route with more than one leg, select Route

Leg Info > On.

• To show next-turn data based on distance, select Next

Turn > Distance.

• To show next-turn data based on time, select Next Turn >

Time.

• To indicate how the destination data appears, select

Destination, and select an option.

Chart Appearance Settings

You can adjust the appearance of the different charts and 3D

chart views. Each setting is specific to the chart or chart view

being used.

NOTE:

Not all settings apply to all charts and 3D chart views

and chartplotter models. Some options require premium maps or

connected accessories.

From a chart or 3D chart view, select

> Chart Setup >

Chart Appearance

Orientation: Sets the perspective of the map.

Detail: Adjusts the amount of detail shown on the map, at

different zoom levels.

Heading Line: Shows and adjusts the heading line, which is a

line drawn on the map from the bow of the boat in the

Charts and 3D Chart Views 7

Garmin GPSMAP 820xs Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 820xs

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info