Bedienungsanleitung Garmin GPSMAP 820xs (Seite 17 von 46) (Englisch)

590108

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Review the course indicated by the magenta line.

Follow the magenta line along each leg in the route, steering

to avoid land, shallow water, and other obstacles.

If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line

(direct course).

Browsing for and Navigating Parallel to a Saved

Route

Before you can browse a list of routes and navigate to one of

them, you must create and save at least one route.

Select Nav Info > Routes & Auto Guidance Paths.

Select a route.

Select

Navigate To.

Select Offset to navigate parallel to the route, offset from it

by a specific distance.

Indicate how to navigate the route:

• To navigate the route from the starting point used when

the route was created, to the left of the original route,

select Forward - Port.

• To navigate the route from the starting point used when

the route was created, to the right of the original route,

select Forward - Starboard.

• To navigate the route from the destination point used

when the route was created, to the left of the original

route, select Backward - Port.

• To navigate the route from the destination point used

when the route was created, to the right of the original

route, select Backward - Starboard

If necessary, select

Done.

A magenta line appears. In the center of the magenta line is

a thinner purple line that represents the corrected course

from your present location to the destination. The corrected

course is dynamic, and it moves with your boat when you are

off course.

Review the course indicated by the magenta line.

Follow the magenta line along each leg in the route, steering

to avoid land, shallow water, and other obstacles.

If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line

(direct course).

Deleting a Saved Route

Select Nav Info > Routes & Auto Guidance Paths.

Select a route.

Select Review >

Delete

Deleting All Saved Routes

Select Nav Info > Manage Data > Clear User Data >

Routes & Auto Guidance Paths.

Auto Guidance

CAUTION

The Auto Guidance feature is based on electronic chart

information. That data does not ensure obstacle and bottom

clearance. Carefully compare the course to all visual sightings,

and avoid any land, shallow water, or other obstacles that may

be in your path.

NOTE:

Auto Guidance is available with premium charts, in some

areas.

You can use Auto Guidance to plot the best path to your

destination. Auto Guidance uses your chartplotter to scan chart

data, such as water depth and known obstacles, to calculate a

suggested path. You can adjust the path during navigation.

Setting and Following an Auto Guidance Path

Select a destination (Destinations).

Select Navigate To

> Auto Guidance

Review the path, indicated by the magenta line.

Select

Start Navigation.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

NOTE: When using Auto Guidance, a gray segment within

any part of the magenta line indicates that Auto Guidance

cannot calculate part of the Auto Guidance line. This is due to

the settings for minimum safe water depth and minimum safe

obstacle height.

Creating and Saving an Auto Guidance

Path

Select Nav Info

> Routes & Auto Guidance Paths > New >

Auto Guidance

Select a starting point, and select Next.

Select a destination, and select Next.

Select an option:

• To view a hazard and adjust the path near a hazard,

select Hazard Review.

• To adjust the path, select

Adjust Path, and follow the on-

screen instructions.

• To delete the path, select Cancel Auto Guidance.

• To save the path, select Done.

Adjusting an Auto Guidance Path

From the Navigation chart, follow the on-screen instructions

or use the arrow keys to move the destination point to the

new location.

Select Select

> Move Point

Select

BACK to return to the navigation screen.

Canceling an Auto Guidance Calculation in Progress

From the Navigation chart, select MENU >

Cancel

TIP:

You can select BACK to quickly cancel the calculation.

Setting a Timed Arrival

You can use this feature on a route or an Auto Guidance path to

get feedback about when you should arrive at a selected point.

This allows you to time your arrival at a location, such as a

bridge opening or a race starting line.

From the Navigation chart, select MENU.

If necessary, select Navigation Options.

Select

Timed Arrival.

TIP: You can quickly open the Timed Arrival

menu by

selecting a point on the path or route.

Auto Guidance Line Configurations

CAUTION

The Safe Depth and Safe Height settings influence how the

chartplotter calculates an Auto Guidance line. If an area has an

unknown water depth or an unknown obstacle height, the Auto

Guidance line is not calculated in that area. If an area at the

beginning or the end of an Auto Guidance line is shallower than

the safe water depth or lower than the safe obstacle height, the

Auto Guidance line is not calculated in that area. On the chart,

the course through those areas appears as a gray line. When

your boat enters one of those areas, a warning message

appears.

NOTE:

Auto Guidance is available with premium charts, in some

areas.

You can set the parameters the chartplotter uses when

calculating an Auto Guidance line.

Navigation with a Chartplotter 11

Garmin GPSMAP 820xs Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 820xs

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info