Bedienungsanleitung Garmin GPSMAP 820xs (Seite 38 von 46) (Englisch)

590108

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Viewing Weather Subscription Information

You can view information about the weather services you have

subscribed to and how many minutes have passed since the

data for each service was updated.

Select

Weather

> Weather Subscription

Device Configuration

Turning On the Chartplotter Automatically

You can set the chartplotter to turn on automatically when the

power is applied. Otherwise, you must turn on the chartplotter by

pressing

Select Settings

> System > Auto Power

NOTE:

When Auto Power is On, and the chartplotter is

turned off using

, and power is removed and reapplied

within less than two minutes, you may need to press to

restart the chartplotter.

System Settings

Select

Settings

> System

Display: Adjusts the backlight brightness and color scheme.

Beeper: Turns on and off the tone that sounds for alarms and

selections.

GPS: Provides information about the GPS satellite settings and

fix.

Auto Power: Turns on the device automatically when power is

applied (Turning On the Chartplotter Automatically).

Language: Sets the on-screen text language.

Speed Sources: Sets the source of the speed data used to

calculate true wind speed or fuel economy. Water speed is

the speed reading from a water-speed sensor, and GPS

speed is calculated from your GPS position.

System Information: Provides information about the device and

the software version.

Simulator: Turns on the simulator and allows you to set the

speed and simulated location.

Display Settings

Not all options are available on all models.

Select Settings

> System > Display

Backlight: Sets the backlight level.

Color Mode: Sets the device to display day or night colors.

Screenshot Capture: Allows the device to save images of the

screen.

GPS Settings

Select Settings

> System > GPS

Skyview: Shows the relative position of GPS satellites in the

sky.

GLONASS: Turns on or off GLONASS usage (Russia satellite

system). When the system is used in situations with poor sky

visibility, this configuration can be used in combination with

GPS to provide more accurate position information.

WAAS/EGNOS: Turns on or off WAAS (in North America) or

EGNOS (in Europe), which can provide more-accurate GPS

position information. When using WAAS or EGNOS, the

device may take longer to acquire satellites.

Speed Filter: Averages the speed of your vessel over a short

period of time for smoother speed values.

Source: Allows you to select the preferred source for GPS.

Viewing the Event Log

The event log shows a list of system events.

Select Settings

> System > System Information > Event

Log

Viewing System Software Information

You can view the software version, the basemap version, all

supplemental map information (if applicable), the software

version for an optional Garmin radar (if applicable), and the unit

ID number. You may need this information to update the system

software or to purchase additional map data information.

Select Settings

> System > System Information >

Software Information

My Vessel Settings

NOTE: Some settings and options require additional charts or

hardware.

Select Settings

> My Vessel

Keel Offset: Offsets the surface reading for the depth of a keel,

making it possible to measure depth from the bottom of the

keel instead of from the transducer location (Setting the Keel

Offset).

Temp. Offset: Compensates for the water temperature reading

from a NMEA 0183 water-temperature sensor or a

temperature-capable transducer (Setting the Water

Temperature Offset).

Calibrate Water Speed: Calibrates the speed-sensing

transducer or sensor (Calibrating a Water Speed Device).

Fuel Capacity: Sets the combined fuel capacity of all the fuel

tanks on your vessel (Setting the Fuel Capacity of the

Vessel).

Vessel Type: Enables some chartplotter features based on the

boat type.

Fill Up All Tanks: Sets the tank levels to full (Synchronizing the

Fuel Data with the Actual Vessel Fuel).

Add Fuel to Boat: Allows you to enter the quantity of fuel you

added to your tank, when you did not entirely fill up the tank

(Synchronizing the Fuel Data with the Actual Vessel Fuel).

Set Total Fuel Onboard: Sets the combined amount of fuel in

all the fuel tanks on your vessel (Synchronizing the Fuel Data

with the Actual Vessel Fuel).

Set Gauge Limits: Sets the upper and lower limits of various

gauges (Customizing Engine Gauge and Fuel Gauge Limits).

Setting the Keel Offset

You can enter a keel offset to compensate the surface reading

for the depth of a keel, making it possible to measure depth from

the bottom of the keel instead of from the transducer location.

Enter a positive number to offset for a keel. You can enter a

negative number to compensate for a large vessel that may

draw several feet of water.

Complete an action, based on the location of the transducer:

• If the transducer is installed at the water line

, measure

the distance from the transducer location to the keel of the

boat. Enter this value in steps 3 and 4 as a positive

number.

• If the transducer is installed at the bottom of the keel

measure the distance from the transducer to the water

line. Enter this value in steps 3 and 4 as a negative

number.

32 Device Configuration

Garmin GPSMAP 820xs Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 820xs

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info