Bedienungsanleitung Garmin GPSMAP 8400 serie (Seite 6 von 8) (Englisch)

658281

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Item Description

Power source

Power cable

Horn

Lamp

NMEA 0183 cable

Relay (100 mA coil current)

Toggle switches to enable and disable lamp or horn alerts

Item Wire Color Wire Function

Red Power

Black Ground

Yellow Alarm

J1939 Engine Network Connection Considerations

NOTICE

You must use a Garmin GPSMAP J1939 accessory cable when

connecting the chartplotter to the J1939 engine network to

prevent corrosion due to moisture. Using a different cable voids

your warranty.

If you have an existing engine network on your boat, it should

already be connected to power. Do not add any additional power

supply.

This chartplotter can connect to an engine network on your boat

to read data from compatible devices such as certain engines.

The engine network follows a standard and uses proprietary

messages.

You should connect only one chartplotter to one engine network.

Connecting more than one chartplotter to one engine network

may result in unexpected behavior.

The port labeled ENGINE/J1939 is used to connect the device

to the existing engine network. You must route the cable within

6 m (20 ft.) of the engine network backbone.

The Garmin GPSMAP J1939 accessory cable requires

connection to a power source and proper termination. For more

information on connecting to your engine network, see the

manufacturer's engine documentation.

Pin Wire Color Description

Bare Shield

Red Power, positive

Black Power, negative

White CAN High

Blue CAN Low

HDMI

Video Considerations

NOTICE

To prevent corrosion due to moisture, you must use Garmin

GPSMAP accessory cables when connecting the chartplotter to

the video source or display. Do not connect a media player stick

directly into the back of the chartplotter. Using different cables or

connecting a media player stick into the back of the chartplotter

voids your warranty.

This chartplotter allows video input from HDMI video sources,

such as a Chromecast

™

device or a Blu-Ray

™

player. You can

view protected HDMI content (HDCP content) on the chartplotter

screen. HDMI video is shared across the Garmin Marine

Network, but it is not shared across the NMEA 2000 network.

HDCP content is not shared across the Garmin Marine Network.

Through the HDMI OUT port, you can duplicate the chartplotter

screen on another device, such as a television or monitor. You

cannot view HDCP content on the duplicated screen.

The Garmin GPSMAP HDMI accessory cable is 4.5 m (15 ft)

long. If you need a longer cable, you should use an active HDMI

cable only. You need an HDMI coupler to connect the two HDMI

cables.

You need a Garmin GPSMAP USB OTG adapter cable to power

a media player stick. The USB port can supply up to 2.5 W to

power a media player stick.

You must make all cable connections in a dry environment.

Item Description

GPSMAP 8400/8600 chartplotter

Display with an HDMI In port, such as a computer or television

GPSMAP HDMI cable (HDMI IN)

GPSMAP USB OTG adapter cable to power the HDMI source, if

possible (2.5 W maximum)

GPSMAP HDMI cable (HDMI OUT)

HDMI source, such as a Blu-Ray player or Chromecast device

Dry environment, protected from moisture

Composite Video Considerations

This chartplotter allows video input from composite video

sources using the port labeled CVBS IN. When connecting

composite video, you should observe these considerations.

• The CVBS IN port uses a BNC connector. You can use a

BNC to RCA adapter to connect a composite-video source

with RCA connectors to the CVBS IN port.

• Video is shared across the Garmin Marine Network, but it is

not shared across the NMEA 2000 network.

Touchscreen Controls for a Connected Computer

NOTICE

To prevent corrosion due to moisture, you must use Garmin

GPSMAP accessory cables when connecting the chartplotter to

the computer. Using different cables voids your warranty.

You can connect the chartplotter to a computer to see the

computer screen and to control the computer using the

chartplotter touchscreen. To see the computer screen, you must

connect the computer to the HDMI IN port. To control the

computer using the chartplotter touchscreen, you must connect

the computer to the USB port.

The Garmin GPSMAP HDMI accessory cable is 4.5 m (15 ft)

long. If you need a longer cable, you should use an active HDMI

cable only. You need an HDMI coupler to connect the two HDMI

cables. You must make all cable connections in a dry

environment.

The Garmin GPSMAP USB accessory cable is 4.5 m (15 ft)

long. If you need a longer cable, you should use a USB hub or

USB repeater extension cable only. You should make all cable

connections in a dry environment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 8400 serie Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 8400 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info