Bedienungsanleitung Garmin GPSMAP 8417 (Seite 59 von 222) (Englisch)

801323

Zoom out

Zoom in

Vorherige Seite

1/222

Nächste Seite

Radar Overlay Settings

From the Navigation or Fishing chart, select Options > Layers > Radar > .

From a radar screen, select Options.

Radar To Standby: Stops radar transmission.

Gain: Adjusts the gain (Adjusting Gain on the Radar Screen Automatically, page104).

Sea Clutter: Adjusts the sea clutter (Adjusting Gain on the Radar Screen Automatically, page104).

Radar Options: Opens the radar options menu (Radar Options Menu, page107).

Other Vessels: Sets how other vessels are displayed on the radar view (Other Vessels Layer Settings, page43).

Radar Setup: Opens the radar display settings (Radar Setup Menu, page107).

Edit Overlays: Adjusts the data shown on the screen (Customizing the Data Overlays, page17).

Chart Settings

NOTE: Not all settings apply to all charts and 3D chart views. Some settings require external accessories or

applicable premium charts.

From a chart, select Options > Chart Settings.

Map Orientation: Sets the perspective of the map.

Look Ahead: Shifts your present location toward the bottom of the screen automatically as your speed

increases. Enter your top speed for the best results.

Vessel Orientation: Sets the alignment of the vessel icon on the map. The Auto option aligns the vessel icon

using GPS COG at high speeds and the magnetic heading at low speeds to better align the vessel icon with

the active track line. The Heading option aligns the vessel icon with the magnetic heading. The GPS Heading

(COG) option aligns the vessel icon using GPS COG. If the selected data source is not available, the available

data source is used instead.

WARNING

The vessel orientation setting is for informational purposes and is not intended to be precisely followed. Always

defer to the navaids and conditions on the water to avoid groundings or hazards that could result in vessel

damage, personal injury, or death.

NOTE: You can set the Map Orientation and Vessel Orientation settings separately for two navigation charts

used in a combination page.

Detail: Adjusts the amount of detail shown on the map, at different zoom levels.

Chart Size: Sets the visible size of the chart.

World Map: Uses either a basic world map or a shaded relief map on the chart. These differences are visible

only when zoomed out too far to see the detailed charts.

Start Line: Sets the starting line for the sailing race (Setting the Starting Line, page64).

Inset Map: Shows a small map centered on your present location.

Fish Eye 3D Settings

NOTE: This feature is available with premium charts, in some areas.

From the Fish Eye 3D chart view, select Options.

View: Sets the perspective of the 3D chart view.

Tracks: Shows tracks.

Sonar Cone: Shows a cone that indicates the area covered by the transducer.

Fish Symbols: Shows suspended targets.

Charts and 3D Chart Views 45

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 8417 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 8417

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info