Bedienungsanleitung Garmin GPSMAP 8424 MFD (Seite 57 von 64) (Englisch)

658280

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Item Description

GPSMAP

8400/8600 Series chartplotter

Computer

GPSMAP

USB cable

Dry environment, protected from moisture

GPSMAP

HDMI cable (HDMI IN)

Controlling a Computer with the Chartplotter

Before you can control a computer using the chartplotter, you

must connect the chartplotter and computer correctly. See the

chartplotter installation instructions for connection information.

Select A/V, Gauges, Controls > Video.

Select the HDMI source for the computer.

Select Menu

> USB Touch Out

You can now control your computer using two-finger touch

gestures on the chartplotter screen.

If necessary, select Menu

> Full Screen

to view the

computer screen in full screen mode.

TIP:

To exit full screen mode, press

Pairing the GRID Remote Input Device with

the Chartplotter

Before you can use a GRID

remote input device with a

chartplotter, you must pair the devices.

You can initiate the paring of the devices from the chartplotter or

from the GRID remote input device.

Pairing the GRID

Device with the Chartplotter from

the Chartplotter

Select Settings > System >

Station Information > GRID™

Pairing > Add

On the

GRID remote input device, press SELECT.

Pairing the GRID

Device with the Chartplotter from

the GRID Device

On the GRID remote input device, press +

and HOME at the

same time.

A selection page opens on all of the chartplotters on the

Garmin Marine Network.

Rotate the wheel on the

GRID remote input device to

highlight Select on the chartplotter you want to control with

the GRID remote input device.

Press

SELECT.

Rotating the GRID

Joystick

For certain installation situations, you can rotate the orientation

of the GRID

joystick.

Select Settings >

Communications > Marine Network

Select the

GRID device.

Cleaning the Screen

NOTICE

Cleaners containing ammonia will harm the anti-reflective

coating.

The device is coated with a special anti-reflective coating which

is very sensitive to waxes and abrasive cleaners.

Apply an eyeglass lens cleaner specified as safe for anti-

reflective coatings to the cloth.

Gently wipe the screen with a soft, clean, lint-free cloth.

Viewing Images on a Memory card

You can view images that are saved on a memory card. You

can view .jpg, .png, and .bmp files.

Insert a memory card with image files into the card slot.

Select Info

> Image Viewer

Select the folder containing the images.

Wait a few seconds for the thumbnail images to load.

Select an image.

Use the arrows to scroll through the images.

If necessary, select Menu

> Start Slideshow

Screenshots

You can capture a screenshot of any screen shown on your

chartplotter as a bitmap (.bmp) file. You can transfer the

screenshot to your computer. You can also view the screenshot

in the image viewer (

Viewing Images on a Memory card,

page 49)

Capturing Screenshots

Insert a memory card into the card slot.

Select Settings > Preferences > Screenshot Capture >

On.

Go to a screen you want to capture.

Hold Home

for at least six seconds.

Copying Screenshots to a Computer

Remove the memory card from the chartplotter, and insert it

into a card reader that is attached to a computer.

From

Windows

Explorer, open the Garmin\scrn folder on the

memory card.

Copy a .bmp file from the card and paste it to any location on

the computer.

Troubleshooting

My device will not acquire GPS signals

If the device is not acquiring satellite signals, there could be a

few causes. If the device has moved a large distance since the

last time it has acquired satellites or has been turned off for

longer than a few weeks or months, the device may not be able

to acquire the satellites correctly.

• Ensure the device is using the latest software. If not, update

the device software (Software Update,

page

2).

• If the device is using an internal GPS antenna, make sure the

device has a clear view of the sky so the internal antenna can

receive the GPS signal. If it is mounted inside of a cabin, it

should be close to a window so it can receive the GPS signal.

If the device is mounted inside a cabin and cannot be placed

in a location where the device can acquire satellites, use an

external GPS antenna.

• If the device is using an external GPS antenna, make sure

the antenna is connected to the chartplotter or the NMEA

network.

• If the device has more than one GPS antenna source, select

a different source

(

Selecting the GPS Source, page 2)

Appendix 49

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 8424 MFD Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 8424 MFD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info