Bedienungsanleitung Garmin GPSMAP 8530 (Seite 38 von 62) (Englisch)

522257

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

From the autopilot screen, select Menu > Pattern Steering >

Circles.

If necessary, select

Time, and select a time for the autopilot

to steer one complete circle.

Select Engage Port or

Engage Starboard.

Setting Up and Following the Zigzag Pattern

You can use the zigzag pattern to steer the boat from port to

starboard and back, over a specified time and angle, across

your present heading.

From the autopilot screen, select Menu > Pattern Steering >

Zigzag.

If necessary, select

Amplitude, and select a degree.

If necessary, select

Period, and select a length of time.

Select

Engage Zigzag.

Following the Williamson Turn Pattern

You can use the Williamson turn pattern to steer the boat

around with the intent of running alongside the location where

the Williamson turn pattern was initiated. The Williamson turn

pattern can be used in man overboard situations.

From the autopilot screen, select Menu

> Pattern Steering >

Williamson Turn

Select

Engage Port or Engage Starboard.

Following an Orbit Pattern

You can use the orbit pattern to steer the boat in a continuous

circle around the active waypoint. The size of the circle is

defined by your distance from the active waypoint when you

begin the orbit pattern.

From the autopilot screen, select Menu >

Pattern Steering >

Orbit

Select

Engage Port or Engage Starboard.

Setting Up and Following the Cloverleaf Pattern

You can use the cloverleaf pattern to steer the boat to

repeatedly pass over an active waypoint. When you begin the

cloverleaf pattern, the autopilot drives the boat toward the active

waypoint and begins the cloverleaf pattern.

You can adjust the distance between the waypoint and the

location where the autopilot turns the boat for another pass over

the waypoint. The default setting turns the boat at a range of

1000 ft. (300 m) from the active waypoint.

From the autopilot screen, select Menu

> Pattern Steering >

Cloverleaf

If necessary, select Length, and select a distance.

Select

Engage Port or Engage Starboard.

Setting Up and Following a Search Pattern

You can use the search pattern to steer the boat in increasingly

larger circles outward from the active waypoint, forming a spiral

pattern. When you begin the search pattern, the autopilot drives

the boat to the active waypoint and begins the pattern.

You can adjust the distance between each circle in the spiral.

The default distance between circles is 50 ft. (20 m).

From the autopilot screen, select Menu > Pattern Steering >

Search.

If necessary, select

Search Spacing, and select a distance.

Select

Engage Port or Engage Starboard.

Cancelling a Steering Pattern

• Physically steer the boat.

NOTE: Shadow Drive must be enabled to cancel a steering

pattern by physically steering the boat.

• Select or to cancel a pattern using step steering mode.

• Select

Standby.

Digital Selective Calling

Networked Chartplotter and VHF Radio

Functionality

If you have a NMEA

0183 VHF radio or a NMEA 2000 VHF

radio connected to your chartplotter, these features are enabled.

• The chartplotter can transfer your GPS position to your radio.

If your radio is capable, GPS position information is

transmitted with DSC calls.

• The chartplotter can receive digital selective calling (DSC)

distress and position information from the radio.

• The chartplotter can track the positions of vessels sending

position reports.

If you have a Garmin NMEA 2000 VHF radio connected to your

chartplotter, these features are also enabled.

• The chartplotter allows you to quickly set up and send

individual routine call details to your Garmin

VHF radio.

• When you initiate a man-overboard distress call from your

radio, the chartplotter shows the man-overboard screen and

prompts you to navigate to the man-overboard point.

• When you initiate a man-overboard distress call from your

chartplotter, the radio shows the Distress Call page to initiate

a man-overboard distress call.

Turning On DSC

Select

Settings > Other Vessels > DSC.

DSC List

The DSC list is a log of the most recent DSC calls and other

DSC contacts you have entered. The DSC list can contain up to

100 entries. The DSC list shows the most recent call from a

boat. If a second call is received from the same boat, it replaces

the first call in the call list.

Viewing the DSC List

Before you can view the DSC list, the chartplotter must be

connected to a VHF radio that supports DSC.

Select Info >

DSC List

Adding a DSC Contact

You can add a vessel to your DSC list. You can make calls to a

DSC contact from the chartplotter.

Select Info

> DSC List > Add Contact

Enter the Maritime Mobile Service Identity (MMSI) of the

vessel.

Enter the name of the vessel.

Incoming Distress Calls

If your compatible chartplotter and VHF radio are connected

using

NMEA 0183 or NMEA 2000, your chartplotter alerts you

when your VHF radio receives a DSC distress call. If position

information was sent with the distress call, that information is

also available and recorded with the call.

designates a distress call in the DSC list and marks the

position of the vessel on the Navigation chart at the time of the

DSC distress call.

Navigating to a Vessel in Distress

designates a distress call in the DSC list and marks the

position of a vessel on the Navigation chart at the time of the

DSC distress call.

Select Info > DSC List.

Select a position-report call.

Select Review > Navigate To.

Select Go To or

Route To.

30 Digital Selective Calling

Garmin GPSMAP 8530 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 8530

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info