Bedienungsanleitung Garmin GPSMAP 86 (Seite 17 von 28) (Englisch)

737440

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Enabling chirp Searching

Select Setup > Geocaching.

Select chirp™ Searching > On.

Finding a Geocache with a chirp

With chirp searching enabled, navigate to a geocache.

When you are within approximately 10 m (33 ft.) of the

geocache that contains a chirp, details about the chirp

appear.

Select Show Details.

If necessary, select Go to navigate to the next stage of the

geocache.

Removing Live Geocache Data from the Device

You can remove live geocache data to show only geocaches

manually loaded on the device using a computer.

Select Setup > Geocaching > Geocaching Live > Remove

Live Data.

Live geocaching data is removed from the device and no

longer appears in the geocache list.

Removing Your Device Registration From

Geocaching.com

If you transfer ownership of your device, you can remove your

device registration from the geocaching website.

Select Setup > Geocaching > Geocaching Live >

Unregister Device.

Setting a Proximity Alarm

Proximity alarms alert you when you are within a specified range

of a particular location.

Select Proximity Alarms > Create Alarm.

Select a category.

Select a location.

Select Use.

Enter a radius.

When you enter an area with a proximity alarm, the device

sounds a tone.

Editing or Deleting a Proximity Alarm

Select Proximity Alarms.

Select an alarm.

Select an option:

• To edit the radius, select Change Radius.

• To view the alarm on a map, select View Map.

• To delete the alarm, select Delete.

Sending and Receiving Data Wirelessly

Before you can share data wirelessly, you must be within 3 m

(10 ft.) of a compatible Garmin device.

Your device can send and receive data wirelessly when

connected with a compatible Garmin device using ANT+

technology. You can share waypoints, geocaches, routes,

tracks, and more.

Select Share Wirelessly.

Select an option:

• Select Send, and select a type of data.

• Select Receive to receive data from another device. The

other compatible device must be attempting to send data.

Follow the on-screen instructions.

Selecting a Profile

When you change activities, you can change the setup of the

device by changing the profile.

Select Profile Change.

Select a profile.

Calculating the Size of an Area

Select Area Calculation > Start.

Walk around the perimeter of the area you want to calculate.

Select Calculate when finished.

Using the VIRB Remote

Before you can use the VIRB remote function, you must enable

the remote setting on your VIRB camera. See the VIRB Series

Owner's Manual for more information.

The VIRB remote function allows you to control your VIRB

action camera using your device.

Turn on your VIRB camera.

On your GPSMAP 86 device, select VIRB Remote.

Wait while the device connects to your VIRB camera.

Select an option:

• To record video, select .

• To take a photograph, select .

Using the Flashlight

NOTE: Using the flashlight can reduce battery life. You can

reduce the brightness or flash frequency to extend the life of the

battery.

Select Flashlight > ENTER.

If necessary, use the brightness slider to adjust the

brightness.

If necessary, select a different flash type.

0 No strobe, constant beam.

1 through 9 Number of strobes per second.

SOS Emergency strobe.

NOTE: Wi‑Fi, Bluetooth, and ANT+ connections are

disabled in SOS mode.

Satellite Page

The satellite page shows your current location, GPS accuracy,

satellite locations, and signal strength.

You can select or to view additional satellite constellations,

for example, when the GPS + GLONASS or GPS + GALILEO

satellite system is enabled.

GPS Satellite Settings

Select Satellite > MENU.

Use With GPS On: Allows you to turn the GPS on.

Track Up: Indicates whether satellites are shown with rings

oriented with north toward the top of the screen or oriented

with your current track toward the top of the screen.

Single Color: Allows you to select whether the satellite page is

displayed in multicolor or single color.

Set Location On Map: Allows you to mark your current location

on the map. You can use this location to create routes or

search for saved locations.

AutoLocate Position: Calculates your GPS position using the

Garmin AutoLocate

feature.

Satellite Setup: Sets the satellite system options (Satellite

Settings, page 14).

Main Menu Tools 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 86 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 86

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info