Bedienungsanleitung Garmin GPSMAP 8600 serie (Seite 20 von 64) (Englisch)

658282

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

NOTE:

Auto Guidance is available with premium charts, in some

areas.

Before you can navigate to a waypoint, you must create a

waypoint.

Select Info

> User Data > Waypoints

Select a waypoint.

Select

Navigate To.

Select an option:

• To navigate directly to the location, select Go To.

• To create a route to the location, including turns, select

Route To

• To use Auto Guidance, select Auto Guidance.

Review the course indicated by the magenta line.

NOTE:

When using Auto Guidance, a gray segment within

any part of the magenta line indicates that Auto Guidance

cannot calculate part of the Auto Guidance line. This is due to

the settings for minimum safe water depth and minimum safe

obstacle height.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

Deleting a Waypoint or an MOB

Select Info

> User Data > Waypoints

Select a waypoint or an MOB.

Select Review > Delete.

Deleting All Waypoints

Select Info

> User Data > Clear User Data > Waypoints >

All

Setting and Following a Direct Course Using Go To

CAUTION

When using Go To, a direct course and a corrected course may

pass over land or shallow water. Use visual sightings, and steer

to avoid land, shallow water, and other dangerous objects.

You can set and follow a direct course from your current location

to a selected destination.

Select a destination (Destinations, page 11).

Select Navigate To

> Go To

A magenta line appears. In the center of the magenta line is

a thinner purple line that represents the corrected course

from your current location to the destination. The corrected

course is dynamic, and it moves with your boat when you are

off course.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line

(direct course).

Routes

Creating and Navigating a Route From Your Present

Location

You can create and immediately navigate a route on the

Navigation chart or the Fishing chart. This procedure does not

save the route or the waypoint data.

NOTE:

The offshore Fishing chart is available with premium

charts, in some areas.

From the Navigation chart or Fishing chart, select a

destination.

Select Navigate To

> Route To

Select the location of the last turn before the destination.

Select

Add Turn.

If necessary, repeat step 3 and 4 to add additional turns,

working backward from the destination to the present location

of your vessel.

The last turn you add should be the first turn you make,

starting from your present location. It should be the turn

closest to your vessel.

If necessary, select

Menu.

Select

Navigate Route.

Review the course indicated by the magenta line.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

Creating and Saving a Route

This procedure saves the route and all the waypoints in it. The

starting point can be your present location or another location.

Select Info

> User Data > Routes & Auto Guidance Paths

> New > Route Using Chart

Select the starting location of the route.

Select

Add Turn.

Select the location of the next turn on the chart.

Select

Add Turn.

The chartplotter marks the location of the turn with a

waypoint.

If necessary, repeat steps 4 and 5 to add more turns.

Select the final destination.

Viewing a List of Routes and Auto Guidance Paths

Select Info > User Data > Routes & Auto Guidance Paths.

If necessary, select

Filter to see routes only or Auto

Guidance paths only.

Editing a Saved Route

You can change the name of a route or change the turns the

route contains.

Select Info >

User Data > Routes & Auto Guidance Paths

Select a route.

Select Review

> Edit Route

Select an option:

• To change the name, select Name

, and enter the name.

• To select a waypoint from the turn list, select Edit Turns >

Use Turn List, and select a waypoint from the list.

• To select a turn using the chart, select Edit Turns >

Use

Chart

, and select a location on the chart.

Browsing for and Navigating a Saved Route

Before you can browse a list of routes and navigate to one of

them, you must create and save at least one route.

Select Info >

User Data > Routes & Auto Guidance Paths

Select a route.

Select Navigate To.

Select an option:

• To navigate the route from the starting point used when

the route was created, select Forward.

• To navigate the route from the destination point used

when the route was created, select Backward.

A magenta line appears. In the center of the magenta line is

a thinner purple line that represents the corrected course

from your present location to the destination. The corrected

course is dynamic, and it moves with your boat when you are

off course.

Review the course indicated by the magenta line.

Follow the magenta line along each leg in the route, steering

to avoid land, shallow water, and other obstacles.

12 Navigation with a Chartplotter

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 8600 serie Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 8600 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info