Bedienungsanleitung Garmin GPSMAP 8600 serie (Seite 36 von 64) (Englisch)

658282

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Select

Up or Down to adjust the appearance of sea clutter

until other targets are clearly visible on the radar screen.

Clutter caused by sea conditions may still be visible.

Adjusting Rain Clutter on the Radar Screen

You can adjust the appearance of clutter caused by rain.

Reducing the radar range also can minimize rain clutter

(Zooming In and Out of the Radar Screen,

page

25).

The rain clutter setting affects the appearance of nearby rain

clutter and targets more than it affects the appearance of distant

rain clutter and targets. A higher rain clutter setting reduces the

appearance of clutter caused by nearby rain, but it can also

reduce or eliminate the appearance of nearby targets.

NOTE:

Depending upon the radar in use, the rain clutter settings

configured for use in one radar mode may or may not be applied

to other radar modes or to the radar overlay.

From a radar screen, select Menu

> Radar Options > Rain

Clutter

Select

Up or Down to decrease or increase the appearance

of nearby rain clutter until other targets are clearly visible on

the radar screen.

Clutter caused by rain may still be visible.

Reducing Cross Talk Clutter on the Radar Screen

You can reduce the appearance of clutter caused by

interference from another nearby radar source, when the cross

talk reject setting is on.

NOTE:

Depending upon the radar in use, the cross talk reject

setting configured for use in one radar mode may or may not be

applied to other radar modes or to the Radar overlay.

From a Radar screen or the Radar overlay, select

Menu >

Radar Setup > Crosstalk Rej..

Radar Options Menu

From a radar screen, select Menu > Radar Options.

MotionScope™: Uses the Doppler effect to detect and highlight

moving targets to help you avoid potential collisions, find

flocks of birds, and track weather formations.

Pulse Exp.: Increases the duration of the transmit pulse, which

helps maximize the energy directed toward targets. This

helps to enhance the detection and identification of targets.

Echo Trails: Enables you to track the movement of vessels on

the radar screen.

Rain Clutter: Reduces the clutter caused by rain.

Show VRM/EBL: Shows the variable range marker (VRM) circle

and the electronic bearing line (EBL) to allow you to measure

the distance and bearing from your boat to a target object.

Enable Guard Zone: Sets a safe zone around your boat and

sounds an alarm when anything enters the zone.

Timed Transmit: Helps conserve power by transmitting radar

signals at set intervals.

Radar Setup Menu

From a radar screen, select Menu > Radar Setup.

Source: Selects the radar source when more than one radar is

connected to the network.

Chart Display: Shows the chart under the radar image. When

enabled, the Chart Setup

menu appears.

Orientation: Sets the perspective of the radar display.

Crosstalk Rej.: Reduces the appearance of clutter caused by

interference from another nearby radar source.

Rotation Spd.: Sets the preferred speed at which the radar

rotates. The High Speed option can be used to increase the

refresh rate. In some situations, the radar automatically

rotates at the normal speed to improve detection, for

example, when a longer range is selected or when

MotionScope or Dual range is used.

Appearance: Sets the color scheme, look-ahead speed, and

navigation appearance.

Installation: Allows you to configure the radar for the

installation, such as setting the front of the boat and the

antenna park position.

Radar Appearance Settings

From a radar screen, select Menu > Radar Setup >

Appearance.

NOTE:

These settings do not apply to the radar overlay.

Bkgd. Color: Sets the color for the background.

Foreground Clr.: Sets the color scheme for the radar returns.

Look-Ahead Speed: Shifts your present location toward the

bottom of the screen automatically as your speed increases.

Enter your top speed for the best results.

Heading Line: Shows an extension from the bow of the boat in

the direction of travel on the radar screen.

Range Rings: Shows the range rings that help you to visualize

distances on the radar screen.

Bearing Ring: Shows a bearing relative to your heading or

based on a north reference, to help you determine the

bearing to an object shown on the radar screen.

Nav Lines: Shows the navigation lines that indicate the course

you have set using Route To, Auto Guidance, or Go To.

Waypoints: Shows waypoints on the radar screen.

Radar Installation Settings

Front of Boat: Compensates for the physical location of the

radar when it is not on the boat axis (Front-of-Boat Offset,

page 28)

Antenna Configuration: Sets the radar antenna size and sets

the position in which the radar stops (Setting a Custom Park

Position,

page

28)

Enable No Transmit Zone: Sets the area in which the radar

does not transmit signals (Enabling and Adjusting a Radar

No Transmit Zone, page 24)

Front-of-Boat Offset

The front-of-boat offset compensates for the physical location of

the radar scanner on a boat, if the radar scanner does not align

with the bow-stern axis.

Measuring the Potential Front-of-Boat Offset

The front-of-boat offset compensates for the physical location of

the radar scanner on a boat, if the radar scanner does not align

with the bow-stern axis.

Using a magnetic compass, take an optical bearing of a

stationary target located within viewable range.

Measure the target bearing on the radar.

If the bearing deviation is more than +/- 1°, set the front-of-

boat offset.

Setting the Front-of-Boat Offset

Before you can set the front-of-boat offset, you must measure

the potential front-of-boat offset.

The front-of-boat offset setting configured for use in one radar

mode is applied to every other radar mode and to the Radar

overlay.

From a Radar screen or the Radar overlay, select Menu >

Radar Setup >

Installation > Front of Boat

Select

Up or Down to adjust the offset.

Setting a Custom Park Position

If you have more than one radar on your boat, you must be

viewing the radar screen for the radar you want to adjust.

By default, the antenna is stopped perpendicular to the pedestal

when it is not spinning. You can adjust this position.

28 Radar

Garmin GPSMAP 8600 serie Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 8600 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info