Bedienungsanleitung Garmin GPSMAP 8617 (Seite 178 von 222) (Englisch)

801336

178

Zoom out

Zoom in

Vorherige Seite

1/222

Nächste Seite

Using Vessel Lock

Your tracking-capable camera can lock on a target using information provided by other devices connected to

the chartplotter. Depending on the target you want to track, using Vessel Lock requires specific equipment

(Camera Tracking, page163).

1If necessary, from a video screen, select Options > Source, and select a compatible camera.

2Select Options > Target Tracking and select an option:

• To track a vessel using AIS position information, select AIS List.

• To track a vessel or target using MARPA information, select MARPA List.

• To track a specific GPS coordinate location, select Waypoints

3Select a target from the list, and select Review.

4Verify the target details, and select Track with Camera.

5Select Back until you return to the video screen.

The camera view automatically adjusts to show the selected vessel or target as either vessel moves.

6If necessary, drag the screen to adjust the camera angle.

The Vessel Lock continues to track the vessel or target using the adjusted camera angle.

7To stop tracking, select Options > Target Tracking > Stop Tracking > Back.

Garmin VIRB® Action Cameras

WARNING

Do not view video or photos while operating the vessel. Failure to pay attention to the conditions on the water

can result in vessel damage, personal injury, or death.

NOTICE

In some jurisdictions it could be considered an invasion of privacy rights to take or publicly display photographs

or videos of people without their permission. It is your responsibility to know and comply with privacy laws and

rights within the applicable jurisdiction(s).

NOTE: Garmin VIRB Action Cameras are discontinued. Go to support.garmin.com for support for existing

cameras.

Most VIRB action cameras connect to the chartplotter from the camera menu (Connecting a VIRB Action

Camera, page165).

The VIRB 360 camera connects using WPS (Connecting a VIRB 360 Action Camera, page164).

In this manual, the term "VIRB action camera" refers to all models, except in the instructions on how to connect.

In that case, as listed above, the term "VIRB 360 camera" refers to only the 360 model.

Connecting a VIRB 360 Action Camera

You can connect a VIRB 360 action camera to the chartplotter using WPS. If you are connecting a VIRB camera,

connect through the camera settings (Connecting a VIRB Action Camera, page165).

1Set up the chartplotter's Wi‑Fi network (Setting Up the Wi‑Fi Network, page27).

2Bring the camera near the chartplotter.

3On the VIRB 360 camera main menu, select Wireless > Wi-Fi.

4If necessary, select the Wi-Fi toggle switch to enable the Wi‑Fi technology.

5Press to select WPS, and press OK.

6On the chartplotter, select Vessel > VIRB® > .

The camera searches for the Wi‑Fi network and connects.

You can control the camera using the chartplotter.

164 Viewing Video

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 8617 Seite 178

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 8617

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info