Bedienungsanleitung Garmin GPSMAP 923 (Seite 181 von 212) (Englisch)

801314

181

Zoom out

Zoom in

Vorherige Seite

1/212

Nächste Seite

Satellite Positioning (GPS) Settings

NOTE: Not all options are available on all models.

Select Settings > System > Satellite Positioning.

Skyview: Shows the relative position of GPS satellites in the sky.

GLONASS: Turns on or off GLONASS data (Russia satellite system). When the system is used in situations with

poor sky visibility, GLONASS data can be used in combination with GPS to provide more accurate position

information.

WAAS/EGNOS: Turns on or off WAAS data (in North America) or EGNOS data (in Europe), which can provide

more-accurate GPS position information. When using WAAS or EGNOS data, the device may take longer to

acquire satellites.

Galileo: Turns on or off Galileo data (European Union satellite system). When the system is used in situations

with poor sky visibility, Galileo data can be used in combination with GPS to provide more accurate position

information.

Speed Filter: Averages the speed of your vessel over a short period of time for smoother speed values.

Source: Allows you to select the preferred source for GPS data.

Station Settings

Select Settings > System > Station Information.

Change Station: Sets the entire station to a new set of defaults based on the location of this station. You can

also select to use this display as a stand-alone, individual display, instead of grouping it with other displays to

make a station.

Input Device Pairing: Allows you to pair a GRID remote input device or other compatible input device with this

station.

Display Order: Sets the order of the displays, which is important when using a GRID remote input device.

Autopilot Enabled: Allows you to control the autopilot from this device.

Reset Layouts: Resets the layouts in this station to the factory default settings.

Reset Station Settings: Resets all station settings to on all connected devices in the station to the factory

default settings, and requires initial station setup.

Viewing System Software Information

You can view the software version, the basemap version, all supplemental map information (if applicable),

the software version for an optional Garmin radar (if applicable), and the unit ID number. You may need this

information to update the system software or to purchase additional map data information.

Select Settings > System > System Information > Software Information.

Viewing the Event Log

The event log shows a list of system events.

Select Settings > System > System Information > Event Log.

Viewing E-label Regulatory and Compliance Information

The label for this device is provided electronically. The e-label may provide regulatory information, such as

identification numbers provided by the FCC or regional compliance markings, as well as applicable product and

licensing information. Not available on all models.

1Select Settings.

2Select System.

3Select Regulatory Information.

Device Configuration 167

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 923 Seite 181

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 923

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info