Bedienungsanleitung Garmin inReach Explorer (Seite 10 von 20) (Englisch)

657447

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Use the Stop Navigating button on the Routes list to close your current route.

Settings Page

Conﬁgure your personal preferences on the Settings page.

Display – Turn Screen Lock on or o!, choose the Dark color scheme to preserve your night vision, increase the

display brightness for better screen visibility, or adjust the timeout of the display screen.

Tip: Keep the Screen Lock turned on to prevent accidental button presses in your pack.

Map – Set the orientation of your map to rotate as your heading changes or to remain North up; auto zoom to

resize the map area to best ﬁt your location and your destination; choose whether Messages, Track Points,

and/or the Track Line show up on the Map page.

Tracking – Choose how frequently Track Points are sent to the Explore website via satellite. Choose a time

interval between 10 minutes and 4 hours. Extreme Plan users have additional interval options of 2 and 5

minutes.

Choose how frequently Track Points are logged on the inReach device. There are two Tracking Log intervals:

While Sending and Logging Only.

Conﬁgure the While Sending interval to control how frequently Track Points are stored on the device

while you are sending track points to the Explore and MapShare sites.

Conﬁgure the Logging Only interval to control how frequently log points are stored on the device even

when the Track Points aren’t being transmitted via satellite to the Explore site. The Logging Only

interval defaults to always log track points, but you have the option to turn it o!.

Tip: Set your Tracking Log interval to more than 30 seconds to conserve battery power.

Prompt for MapShare – A prompt reminds you to send your MapShare link to your contacts each time you

start tracking. Disable this option in Settings>Tracking. Once you disable it, you can no longer send your

MapShare link until you re-enable it.

Bluetooth – Enable and disable the Bluetooth antenna, pair your inReach with your mobile device, or see which

mobile device is connected.

Compass & Altimeter – Calibrate your compass, enable auto-calibrate on the altimeter, or calibrate your

altimeter manually.

Messages – Choose a time interval for the inReach to check for new messages. Set the device to ring until a

new message is read.

Note: Shorter intervals use more battery.

Sounds – Change the default sounds that play for sending and receiving messages, announcing critical alerts,

and powering o! the device; or choose to Mute All sounds.

Time – Choose 12- or 24-hour time format, specify your Time Zone, and select Daylight Savings status.

Tip: Remember to set your Daylight Savings status seasonally! It will not update automatically.

Units – Change the coordinates displayed by the device. Select between miles, kilometers, and nautical units of

measurement. The inReach Explorer uses the WGS84 Datum and is not conﬁgurable.

Power – Choose to have the device turn on or o! automatically when external power is connected or

disconnected.

Owner Info – Enter your personal information and choose to Display Info at startup. This information appears

when your inReach Explorer turns on.

About This Device – View important information including your IMEI Number, Authorization Code, and

Firmware Version.

Restore Factory Settings – Reset your inReach Explorer to the state it was in when you ﬁrst took it out of the

box new. DO NOT use this setting unless you are prepared to lose all of your messages, track points, contacts,

and settings.

Social Page

Send messages to Facebook, Twitter, and your MapShare page on the Social page.

Tip: Add your Facebook and Twitter account information on the Explore website for this feature to work

properly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin inReach Explorer Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info