Bedienungsanleitung Garmin inReach for Smartphones (Seite 8 von 38) (Englisch)

657457

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

6 Using the inReach | DeLorme inReach User Manual

Using the inReach

You can use the inReach as a standalone device when you don’t want to use it with a compatible device. You can also

interact with the inReach directly when it is connected to a compatible device.

Power

• To turn the inReach on, press and hold the Power button until the Power LED ashes green and then release the

button. When the inReach is powered on, the Power LED will ash green once every three seconds.

• To turn the inReach off, press and hold the Power button until the Power LED ashes rapidly and then release the

button.

• When power is low, the Power LED ashes red once every three seconds. See Batteries on page 4 for more

information.

• When there is not enough power to send any messages or tracking points, the Power LED ashes red every 1.5

seconds. See Batteries on page 4 for more information.

Tracking

The Tracking button allows you to send your location to explore.delorme.com when you are using the inReach in

standalone mode. When you are moving, your location is sent every 10 minutes. When you are stationary, your location

is sent every four hours; if you move more than 100 meters, tracking at 10 minute intervals resumes.

• To start tracking, press and hold the Tracking button until the Tracking LED ashes and then release the button.

The LED will ash green once every three seconds while tracking until you cancel tracking or turn off the inReach.

• To stop tracking, press and hold the Tracking button until the Tracking LED ashes rapidly and then release the

button.

You can also use tracking when connected with an Earthmate PN-60w (see page 12) or mobile device (see page

21 for Android and page 25 for iOS). In addition, tracking can be initiated from explore.delorme.com by anyone

who can log in to your account. See the Help at explore.delorme.com for more information.

Message

Use the Message button to send predened inReach messages that you created on explore.delorme.com. You can

create up to three messages—it’s a good idea to make a note of the messages in the proper order and take it with you.

The message is sent to contacts you designated on explore.delorme.com when you created the message.

• To send predened message one, press and hold the Message button until the Message LED ashes once and

then release the button. The Message LED will ash once every three seconds until the message is sent.

• To send predened message two, press and hold the Message button until the Message LED ashes twice and

then release the button. The Message LED will ash twice every three seconds until the message is sent.

• To send predened message three, press and hold the Message button until the Message LED ashes three

times and then release the button. The Message LED will ash three times every three seconds until the message

is sent.

Notes

The LED ashes for choosing the message will cycle in order until you release the Message button to make a

selection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin inReach for Smartphones Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info