Bedienungsanleitung Garmin Inreach Mini (Seite 9 von 12) (Englisch)

674221

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Coordinates: Sets the format used for geographical position

coordinates.

Datum: Sets the coordinate system used by the map.

Speed/Distance: Sets the unit of measure for distance.

Temperature: Sets the temperature units to Fahrenheit (°F) or

Celsius (°C).

Pressure: Sets the pressure units.

Bearing: Sets the north reference used on the compass to true

or magnetic north.

Changing the Device Language

From the main menu, select Setup > Language.

Select a language.

Adding Owner Information

From the main menu, select Setup > Owner Info.

Select OK, enter your information, and select .

Device Information

Support and Updates

Go to explore.garmin.com for easy access to these services for

inReach devices.

• Product registration

• Firmware updates

• Data uploads and syncing your device with your account

Attaching the Spine Mount Adapter

Remove the short screw

from the carabiner strap

Secure the spine mount adapter

over the back of the

device using the long screw

included with the device.

TIP: The spine mount adapter fits over the carabiner strap.

You can attach the adapter over the strap or remove the

strap.

Attaching a Lanyard

Insert the loop of the lanyard through the slot in the device.

Thread the other end of the lanyard through the loop, and pull

it tight.

If necessary, attach the lanyard to your clothing or backpack

to tether it during an activity.

Locking and Unlocking the Keys

You can lock the keys to prevent inadvertent key presses.

Select > Lock Screen.

Select > Unlock to unlock the keys.

Device Care

NOTICE

Avoid chemical cleaners, solvents, and insect repellents that can

damage plastic components and finishes.

Do not store the device where prolonged exposure to extreme

temperatures can occur, because it can cause permanent

damage.

The device is water resistant to IEC Standard 60529 IPX7. It can

withstand accidental immersion in 1 meter of water for 30

minutes. Prolonged submersion can cause damage to the

device. After submersion, be certain to wipe dry and air dry the

device before using or charging.

Thoroughly rinse the device with fresh water after exposure to

chlorinated or salt water environments.

Cleaning the Device

Wipe the device using a cloth dampened with a mild

detergent solution.

Wipe it dry.

After cleaning, allow the device to dry completely.

Troubleshooting

Maximizing Battery Life

• Turn on the Extended Tracking setting (Tracking Settings,

page 4).

• Reduce the backlight timeout (Display Settings, page 4).

• Reduce the value of the tracking Log Interval and Send

Interval settings (Tracking Settings, page 4).

• Turn off Bluetooth wireless technology (Bluetooth Settings,

page 4).

• Turn off ANT+ wireless technology (ANT+ Sensor Settings,

page 4).

Resetting the Device

If the device stops responding, you may need to reset it. This

does not erase any of your data or settings.

Hold and until the device turns off.

Hold to turn on the device.

Restoring All Default Settings

You can restore all device settings to the factory default values.

Device Information 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Inreach Mini Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Inreach Mini

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info