Bedienungsanleitung Garmin Instinct Solar (Seite 27 von 36) (Englisch)

740374

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

After the sensor is paired with your device, the sensor status

changes from Searching to Connected. Sensor data appears

in the data screen loop or a custom data field.

Using an Optional Bike Speed or Cadence

Sensor

You can use a compatible bike speed or cadence sensor to

send data to your device.

• Pair the sensor with your device (Pairing Your Wireless

Sensors, page 22).

• Set your wheel size (Wheel Size and Circumference,

page 28).

• Go for a ride (Starting an Activity, page 2).

Foot Pod

Your device is compatible with the foot pod. You can use the

foot pod to record pace and distance instead of using GPS when

you are training indoors or when your GPS signal is weak. The

foot pod is on standby and ready to send data (like the heart

rate monitor).

After 30 minutes of inactivity, the foot pod powers off to

conserve the battery. When the battery is low, a message

appears on your device. Approximately five hours of battery life

remain.

Improving Foot Pod Calibration

Before you can calibrate your device, you must acquire GPS

signals and pair your device with the foot pod (Pairing Your

Wireless Sensors, page 22).

The foot pod is self-calibrating, but you can improve the

accuracy of the speed and distance data with a few outdoor runs

using GPS.

Stand outside for 5 minutes with a clear view of the sky.

Start a running activity.

Run on a track without stopping for 10 minutes.

Stop your activity, and save it.

Based on the recorded data, the foot pod calibration value

changes, if necessary. You should not need to calibrate the

foot pod again unless your running style changes.

Calibrating Your Foot Pod Manually

Before you can calibrate your device, you must pair your device

with the foot pod sensor (Pairing Your Wireless Sensors,

page 22).

Manual calibration is recommended if you know your calibration

factor. If you have calibrated a foot pod with another Garmin

product, you may know your calibration factor.

From the watch face, hold MENU.

Select Settings > Sensors & Accessories.

Select your foot pod.

Select Cal. Factor > Set Value.

Adjust the calibration factor:

• Increase the calibration factor if your distance is too low.

• Decrease the calibration factor if your distance is too high.

Setting Foot Pod Speed and Distance

Before you can customize the foot pod speed and distance, you

must pair your device with the foot pod sensor (Pairing Your

Wireless Sensors, page 22).

You can set your device to calculate speed and distance using

your foot pod data instead of GPS data.

From the watch face, hold MENU.

Select Settings > Sensors & Accessories.

Select your foot pod.

Select Speed or Distance.

Select an option:

• Select Indoor when you are training with GPS turned off,

usually indoors.

• Select Always to use your foot pod data regardless of the

GPS setting.

tempe

™

The tempe is an ANT+ wireless temperature sensor. You can

attach the sensor to a secure strap or loop where it is exposed

to ambient air, and therefore, provides a consistent source of

accurate temperature data. You must pair the tempe with your

device to display temperature data from the tempe.

Device Information

Specifications

Battery type Rechargeable, built-in lithium-ion battery

Battery life Up to 24 days in smartwatch mode

Water rating 10 ATM

Operating and storage

temperature range

From -20º to 60ºC (from -4º to 140ºF)

USB charging temperature

range

From 0º to 45ºC (from 32º to 113ºF)

Solar charging temperature

range

From 0º to 60ºC (from 32º to 140ºF)

Wireless frequency/protocol 2.4 GHz @ 0 dBm nominal

Battery Life Information

The actual battery life depends on the features enabled on your

device, such as activity tracking, wrist-based heart rate,

smartphone notifications, GPS, internal sensors, and connected

sensors (Maximizing the Battery Life, page 25).

Battery Life Battery Life With Solar Mode

Up to 24 days Up to 24 days plus 30 days

Smartwatch mode with

activity tracking and 24/7

wrist-based heart rate

monitoring

Up to 30 hours Up to 30 hours plus 8

hours

GPS mode with wrist-

based heart rate

Up to 70 hours Up to 70 hours plus 75

hours

Max. battery GPS mode

Up to 28 days Up to 28 days plus 40 days

Expedition GPS mode

Up to 56 days Up to 56 days plus

unlimited

Battery saver watch

mode

Data Management

NOTE: The device is not compatible with Windows

95, 98, Me,

Windows NT

, and Mac

OS 10.3 and earlier.

Disconnecting the USB Cable

If your device is connected to your computer as a removable

drive or volume, you must safely disconnect your device from

your computer to avoid data loss. If your device is connected to

your Windows computer as a portable device, it is not necessary

to safely disconnect the device.

Complete an action:

• For Windows computers, select the Safely Remove

Hardware icon in the system tray, and select your device.

• For Apple

computers, select the device, and select File >

Eject.

The device withstands pressure equivalent to a depth of 100 m. For more

information, go to www.garmin.com/waterrating.

All-day wear with 3 hr./day outside in 50,000 lux conditions.

With use in 50,000 lux conditions.

Device Information 23

Garmin Instinct Solar Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Instinct Solar

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info