522249
15
Zoom out
Zoom in
Vorherige Seite
1/125
Nächste Seite
Introduction: Starting Your Handheld and Calibrating the Screen
1.5
Chapter 1 Introduction
Starting Your Handheld and Calibrating the Screen
The first time you start the iQue handheld, setup instructions appear on the screen. These instructions include a calibration screen,
or digitizer. Calibration aligns the internal circuitry of the handheld with its touch-sensitive screen so your handheld can detect
stylus taps correctly. If you notice that the handheld does not respond properly when you tap the screen with the stylus, you may
need to calibrate the screen again.
To calibrate your screen:
1. Tap the Home (Applications Launcher) icon . Then tap the Prefs icon (you may need to scroll down).
2. In the pick list in the upper right corner of the screen, tap Digitizer.
3. Follow the on-screen instructions.
Using the Multi-Language Feature
If your handheld has the multi-language feature, you will be prompted to select a language once you have calibrated the digitizer.
WARNING: If the language you choose on your handheld does not match the language you chose when you installed
your Palm™ Desktop software, you could suffer data loss. If you are not sure, insert the Setup CD and re-install the Palm
Desktop software.
WARNING: In order to change to another language, you have to perform a hard reset, which will erase all data on your
handheld. If there is data on your handheld that you need to save, perform a HotSync
®
operation before you change lan-
guages.
To select the language on your iQue:
1. Tap your language choice to highlight it, then tap OK. A confirmation screen reminds you that this setting must
match the language setting on your Palm Desktop software.
2. If you select Yes to change to a language other than English, the handheld will reset.
Adjusting the Brightness of Your Screen
To turn the backlight on or off:
1. Press the Power button to turn on the device.
2. Press and hold the
Power button until the backlight turns on or off. Then release the button.
To adjust the backlight brightness:
1. Tap the Backlight icon , located in the Status Bar just below the text input area.
2. Tap and drag the brightness adjustment slider to the desired level. Then tap
Done.
Brightness Adjustment Slider
NOTE: Backlight is the most significant factor in reducing or lengthening battery life. Turning the brightness up and/or
keeping the backlight on can reduce battery life significantly.
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Garmin iQue 3600 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info