Bedienungsanleitung Garmin MARQ Athlete (Seite 43 von 56) (Englisch)

692298

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Select System > About.

Viewing E-label Regulatory and Compliance

Information

The label for this device is provided electronically. The e-label

may provide regulatory information, such as identification

numbers provided by the FCC or regional compliance markings,

as well as applicable product and licensing information.

Hold MENU.

From the system menu, select About.

Wireless Sensors

Your device can be used with wireless ANT+ or Bluetooth

sensors. For more information about compatibility and

purchasing optional sensors, go to buy.garmin.com.

Pairing Your Wireless Sensors

The first time you connect a wireless sensor to your device

using ANT+ or Bluetooth technology, you must pair the device

and sensor. After they are paired, the device connects to the

sensor automatically when you start an activity and the sensor is

active and within range.

If you are pairing a heart rate monitor, put on the heart rate

monitor.

The heart rate monitor does not send or receive data until

you put it on.

Bring the device within 3 m (10 ft.) of the sensor.

NOTE: Stay 10 m (33 ft.) away from other wireless sensors

while pairing.

Hold MENU.

Select Sensors & Accessories > Add New.

Select an option:

• Select Search All.

• Select your sensor type.

After the sensor is paired with your device, the sensor status

changes from Searching to Connected. Sensor data appears

in the data screen loop or a custom data field.

Extended Display Mode

You can use Extended Display mode to display data screens

from your MARQ device on a compatible Edge device during a

ride or triathlon. See your Edge owner's manual for more

information.

Using an Optional Bike Speed or Cadence

Sensor

You can use a compatible bike speed or cadence sensor to

send data to your device.

• Pair the sensor with your device (Pairing Your Wireless

Sensors, page 37).

• Set your wheel size (Wheel Size and Circumference,

page 45).

• Go for a ride (Starting an Activity, page 2).

Training with Power Meters

• Go to www.garmin.com/intosports for a list of ANT+ sensors

that are compatible with your device (such as Vector

™

• For more information, see the owner's manual for your power

meter.

• Adjust your power zones to match your goals and abilities

(Setting Your Power Zones, page 20).

• Use range alerts to be notified when you reach a specified

power zone (Setting an Alert, page 29).

• Customize the power data fields (Customizing the Data

Screens, page 29).

Using Electronic Shifters

Before you can use compatible electronic shifters, such as

Shimano

Di2

™

shifters, you must pair them with your device

(Pairing Your Wireless Sensors, page 37). You can customize

the optional data fields (Customizing the Data Screens,

page 29). The MARQ device displays current adjustment values

when the sensor is in adjustment mode.

Situational Awareness

Your MARQ device can be used with the Varia Vision

™

device,

Varia

™

smart bike lights, and rearview radar to improve

situational awareness. See the owner's manual for your Varia

device for more information.

NOTE: You may need to update the MARQ software before

pairing Varia devices (Updating the Software Using the Garmin

Connect App, page 8).

Foot Pod

Your device is compatible with the foot pod. You can use the

foot pod to record pace and distance instead of using GPS when

you are training indoors or when your GPS signal is weak. The

foot pod is on standby and ready to send data (like the heart

rate monitor).

After 30 minutes of inactivity, the foot pod powers off to

conserve the battery. When the battery is low, a message

appears on your device. Approximately five hours of battery life

remain.

Improving Foot Pod Calibration

Before you can calibrate your device, you must acquire GPS

signals and pair your device with the foot pod (Pairing Your

Wireless Sensors, page 37).

The foot pod is self-calibrating, but you can improve the

accuracy of the speed and distance data with a few outdoor runs

using GPS.

Stand outside for 5 minutes with a clear view of the sky.

Start a running activity.

Run on a track without stopping for 10 minutes.

Stop your activity, and save it.

Based on the recorded data, the foot pod calibration value

changes, if necessary. You should not need to calibrate the

foot pod again unless your running style changes.

Calibrating Your Foot Pod Manually

Before you can calibrate your device, you must pair your device

with the foot pod sensor (Pairing Your Wireless Sensors,

page 37).

Manual calibration is recommended if you know your calibration

factor. If you have calibrated a foot pod with another Garmin

product, you may know your calibration factor.

Hold MENU.

Select Sensors & Accessories.

Select your foot pod.

Select Cal. Factor > Set Value.

Adjust the calibration factor:

• Increase the calibration factor if your distance is too low.

• Decrease the calibration factor if your distance is too high.

Setting Foot Pod Speed and Distance

Before you can customize the foot pod speed and distance, you

must pair your device with the foot pod sensor (Pairing Your

Wireless Sensors, page 37).

Wireless Sensors 37

Garmin MARQ Athlete Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin MARQ Athlete

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info