Bedienungsanleitung Garmin MARQ Captain - American Magic Edition (Seite 10 von 58) (Englisch)

740371

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Marking a Waypoint on Your Chartplotter

You can mark a waypoint on your compatible chartplotter using

your MARQ device.

From the watch face, select START > Boat Data.

Select START > Mark Plotter Wpt.

Grinding

Your device comes pre-loaded with onshore and offshore

grinding activities. Grinding is a cyclic upper body task that

involves the manual arm cranking of sailing winches, which

control the movement of the mast and sails. You can pair your

device with a compatible power meter to track additional metrics

during a grinding activity, including power and cadence (Training

with Power Meters, page 39).

Starting a Grinding Activity

From the watch face, press START.

Select an option:

• To start an onshore grinding activity, select Onshore

Grinding.

• To start an offshore grinding activity, select Offshore

Grinding.

NOTE: The Offshore Grinding activity records the same

data as the Onshore Grinding activity, but also records

speed metrics and shows the route on the map.

Wait for the device to acquire a GPS signal (if required).

Press START to start the activity timer.

The device records activity data only while the activity timer is

running.

Starting a Grinding Workout

Your device comes preloaded with several grinding workouts,

including race simulator, fitness test, and interval workouts. Your

device guides you through the steps in the workout.

Power and cadence measurements require a compatible power

meter. Due to the arm-focused nature of the workout, use a

chest heart rate monitor for best results.

From the watch face, press START.

Select a grinding activity.

Hold MENU.

Select Training.

Select a workout.

Select Do Workout, if necessary.

Press START to start the activity timer.

After you begin a workout, the device displays each step of the

workout, step notes (optional), the target (optional), and the

current workout data.

Fusion-Link

™

App

You can use the Fusion-Link app on your MARQ device to

control the audio playback on your Fusion

device.

Connecting to a Fusion Stereo

Set the Fusion stereo to be discoverable.

See your stereo owner's manual for more information.

Bring your MARQ device within 3 m (10 ft.) of the stereo.

From the watch face, select START > FUSION-Link.

The first time you open the app on the watch, the watch

automatically pairs with and connects to the stereo. If you

need to pair with another stereo, in the Fusion-Link app,

select Settings > Pair New.

After you pair the devices, they connect automatically when

turned on, within range, and the app is open on the watch.

Activities and Apps

Your device can be used for indoor, outdoor, athletic, and fitness

activities. When you start an activity, the device displays and

records sensor data. You can save activities and share them

with the Garmin Connect community.

You can also add Connect IQ

™

activities and apps to your

device using the Connect IQ app (Connect IQ Features,

page 12).

For more information about activity tracking and fitness metric

accuracy, go to garmin.com/ataccuracy.

Starting an Activity

When you start an activity, GPS turns on automatically (if

required).

From the watch face, press START.

Select an option:

• Select an activity from your favorites.

• Select , and select an activity from the extended activity

list.

If the activity requires GPS signals, go outside to an area with

a clear view of the sky, and wait until the device is ready.

The device is ready after it establishes your heart rate,

acquires GPS signals (if required), and connects to your

wireless sensors (if required).

Press START to start the activity timer.

The device records activity data only while the activity timer is

running.

Tips for Recording Activities

• Charge the device before starting an activity (Charging the

Device, page 1).

• Press LAP to record laps, start a new set or pose, or

advance to the next workout step.

• Press UP or DOWN to view additional data pages.

Changing the Power Mode

You can change the power mode to extend battery life during an

activity.

During an activity, hold MENU.

Select Power Mode.

Select an option.

The watch displays the hours of battery life gained with the

selected power mode.

Stopping an Activity

Press STOP.

Select an option:

• To resume your activity, select Resume.

• To save the activity and return to watch mode, select

Save > Done.

• To suspend your activity and resume it at a later time,

select Resume Later.

• To mark a lap, select Lap.

• To navigate back to the starting point of your activity along

the path you traveled, select Back to Start > TracBack.

NOTE: This feature is available only for activities that use

GPS.

• To navigate back to the starting point of your activity by

the most direct path, select Back to Start > Route.

NOTE: This feature is available only for activities that use

GPS.

• To discard the activity and return to watch mode, select

Discard > Yes.

4 Activities and Apps

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin MARQ Captain - American Magic Edition Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin MARQ Captain - American Magic Edition

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info