Bedienungsanleitung Garmin MARQ Captain (Seite 20 von 58) (Englisch)

692308

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Heart Rate Features

The MARQ device has a wrist-based heart rate monitor and is

also compatible with chest heart rate monitors (sold separately).

You can view heart rate data on the heart rate widget. If both

wrist-based heart rate and chest heart rate data are available

when you start an activity, your device uses the chest heart rate

data.

Wrist-based Heart Rate

Wearing the Device

• Wear the device above your wrist bone.

NOTE: The device should be snug but comfortable. For more

accurate heart rate readings, the device should not move

while running or exercising. For pulse oximeter readings, you

should remain motionless.

NOTE: The optical sensor is located on the back of the

device.

• See Tips for Erratic Heart Rate Data, page 14 for more

information about wrist-based heart rate.

• See Tips for Erratic Pulse Oximeter Data, page 21 for more

information about the pulse oximeter sensor.

• For more information about accuracy, go to garmin.com

/ataccuracy.

Tips for Erratic Heart Rate Data

If the heart rate data is erratic or does not appear, you can try

these tips.

• Clean and dry your arm before putting on the device.

• Avoid wearing sunscreen, lotion, and insect repellent under

the device.

• Avoid scratching the heart rate sensor on the back of the

device.

• Wear the device above your wrist bone. The device should

be snug but comfortable.

• Wait until the icon is solid before starting your activity.

• Warm up for 5 to 10 minutes and get a heart rate reading

before starting your activity.

NOTE: In cold environments, warm up indoors.

• Rinse the device with fresh water after each workout.

Viewing the Heart Rate Widget

From the watch face, press UP or DOWN to view the heart

rate widget.

NOTE: You may need to add the widget to your widget loop

(Customizing the Widget Loop, page 34).

Press START to view your current heart rate in beats per

minute (bpm) and a graph of your heart rate for the last 4

hours.

Press DOWN to view your average resting heart rate values

for the last 7 days.

Broadcasting Heart Rate Data to Garmin Devices

You can broadcast your heart rate data from your MARQ device

and view it on paired Garmin devices.

NOTE: Broadcasting heart rate data decreases battery life.

From the heart rate widget, hold MENU.

Select Options > Broadcast Heart Rate.

The MARQ device starts broadcasting your heart rate data,

and appears.

NOTE: You can view only the heart rate widget while

broadcasting heart rate data from the heart rate widget.

Pair your MARQ device with your Garmin ANT+

compatible

device.

NOTE: The pairing instructions differ for each Garmin

compatible device. See your owner's manual.

TIP: To stop broadcasting your heart rate data, press any

button, and select Yes.

Broadcasting Heart Rate Data During an Activity

You can set up your MARQ device to broadcast your heart rate

data automatically when you begin an activity. For example, you

can broadcast your heart rate data to an Edge

device while

cycling, or to a VIRB

action camera during an activity.

NOTE: Broadcasting heart rate data decreases battery life.

From the heart rate widget, hold MENU.

Select Options > Broadcast During Activity.

Begin an activity (Starting an Activity, page 4).

The MARQ device starts broadcasting your heart rate data in

the background.

NOTE: There is no indication that the device is broadcasting

your heart rate data during an activity.

If necessary, pair your MARQ device with your Garmin ANT+

compatible device.

NOTE: The pairing instructions differ for each Garmin

compatible device. See your owner's manual.

TIP: To stop broadcasting your heart rate data, stop the

activity (Stopping an Activity, page 4).

Setting an Abnormal Heart Rate Alert

You can set the device to alert you when your heart rate

exceeds a certain number of beats per minute (bpm) after a

period of inactivity.

From the heart rate widget, hold MENU.

Select Options > Abnormal HR Alert > Status > On.

Select Alert Threshold.

Select a heart rate threshold value.

Each time you exceed the threshold value, a message appears

and the device vibrates.

Turning Off the Wrist-based Heart Rate Monitor

The default value for the Wrist Heart Rate setting is Auto. The

device automatically uses the wrist-based heart rate monitor

unless you pair an ANT+ heart rate monitor to the device.

14 Heart Rate Features

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin MARQ Captain Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin MARQ Captain

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info