Bedienungsanleitung Garmin MARQ Golfer (Gen 2) (Seite 27 von 156) (Englisch)

801346

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Anchor Settings

From the watch face, press START, select Anchor, hold MENU, and select the activity settings.

Drift Radius: Sets the allowable drift distance while anchored.

Update Interval: Sets the time interval for updating anchor data.

Anchor Alarm: Allows you to enable or disable an alarm for when the boat moves beyond the drift radius.

Anchor Alarm Duration: Allows you to set the anchor alarm duration. When the anchor alarm is enabled, an alert

appears each time the boat moves beyond the drift radius during the specified alarm duration.

Skiing and Winter Sports

You can add skiing and snowboarding activities to your activity list (Customizing Activities and Apps, page31).

You can customize the data screens for each activity (Customizing the Data Screens, page32).

Viewing Your Ski Runs

Your watch records the details of each downhill skiing or snowboarding run using the auto run feature. This

feature is turned on by default for downhill skiing and snowboarding. It automatically records new ski runs when

you start moving down hill.

1Start a skiing or snowboarding activity.

2Hold MENU.

3Select View Runs.

4Press UP and DOWN to view details of your last run, your current run, and your total runs.

The run screens include time, distance traveled, maximum speed, average speed, and total descent.

Recording a Backcountry Skiing or Snowboarding Activity

The backcountry skiing or snowboarding activity lets you switch between climbing and descending tracking

modes so you can accurately track your statistics. You can customize the Mode Tracking setting to

automatically or manually switch tracking modes (Activities and App Settings, page33).

1From the watch face, press START.

2Select Backcountry Ski or Backcountry Snowboard.

3Select an option:

• If you are starting your activity on a climb, select Climbing.

• If you are starting your activity moving downhill, select Descending.

4Press START to start the activity timer.

5If necessary, press LAP to switch between climbing and descending tracking modes.

6After you complete your activity, press STOP, and select Save.

Cross-Country Skiing Power Data

NOTE: The HRM-Pro series accessory must be paired to the MARQ watch using ANT+ technology.

You can use your compatible MARQ watch paired with the HRM-Pro series accessory to provide real-time

feedback about your cross-country skiing performance. The power output is measured in watts. Factors that

affect power include your speed, elevation changes, wind, and snow conditions. You can use power output to

measure and improve your skiing performance.

NOTE: Skiing power values are generally lower than cycling power values. This is normal and occurs because

humans are less efficient at skiing than they are at cycling. It is common for ski power values to be 30 to 40

percent lower than cycling power values at the same training intensity.

Activities and Apps 19

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin MARQ Golfer (Gen 2) Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin MARQ Golfer (Gen 2)

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info