Bedienungsanleitung Garmin MARQ Golfer (Seite 11 von 56) (Englisch)

740396

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

The device is ready after it establishes your heart rate,

acquires GPS signals (if required), and connects to your

wireless sensors (if required).

Press START to start the activity timer.

The device records activity data only while the activity timer is

running.

Tips for Recording Activities

• Charge the device before starting an activity (Charging the

Device, page 1).

• Press LAP to record laps, start a new set or pose, or

advance to the next workout step.

• Press UP or DOWN to view additional data pages.

Changing the Power Mode

You can change the power mode to extend battery life during an

activity.

During an activity, hold MENU.

Select Power Mode.

Select an option.

The watch displays the hours of battery life gained with the

selected power mode.

Stopping an Activity

Press STOP.

Select an option:

• To resume your activity, select Resume.

• To save the activity and return to watch mode, select

Save > Done.

• To suspend your activity and resume it at a later time,

select Resume Later.

• To mark a lap, select Lap.

• To navigate back to the starting point of your activity along

the path you traveled, select Back to Start > TracBack.

NOTE: This feature is available only for activities that use

GPS.

• To navigate back to the starting point of your activity by

the most direct path, select Back to Start > Route.

NOTE: This feature is available only for activities that use

GPS.

• To discard the activity and return to watch mode, select

Discard > Yes.

NOTE: After stopping the activity, the device saves it

automatically after 30 minutes.

Adding or Removing a Favorite Activity

The list of your favorite activities appears when you press

START from the watch face, and it provides quick access to the

activities you use most. You can add or remove favorite

activities at any time.

Hold MENU.

Select Activities & Apps.

Your favorite activities appear at the top of the list.

Select an option:

• To add a favorite activity, select the activity, and select

Set as Favorite.

• To remove a favorite activity, select the activity, and select

Remove from Favorites.

Creating a Custom Activity

From the watch face, press START.

Select Add.

Select an option:

• Select Copy Activity to create your custom activity

starting from one of your saved activities.

• Select Other to create a new custom activity.

If necessary, select an activity type.

Select a name or enter a custom name.

Duplicate activity names include a number, for example:

Bike(2).

Select an option:

• Select an option to customize specific activity settings. For

example, you can customize the data screens or auto

features.

• Select Done to save and use the custom activity.

Select Yes to add the activity to your list of favorites.

Indoor Activities

The MARQ device can be used for training indoors, such as

running on an indoor track or using a stationary bike. GPS is

turned off for indoor activities (Activities and App Settings,

page 29).

When running or walking with GPS turned off, speed, distance,

and cadence are calculated using the accelerometer in the

device. The accelerometer is self-calibrating. The accuracy of

the speed, distance, and cadence data improves after a few

outdoor runs or walks using GPS.

TIP: Holding the handrails of the treadmill reduces accuracy.

You can use an optional foot pod to record pace, distance, and

cadence.

Calibrating the Treadmill Distance

To record more accurate distances for your treadmill runs, you

can calibrate the treadmill distance after you run at least 1.5 km

(1 mi.) on a treadmill. If you use different treadmills, you can

manually calibrate the treadmill distance on each treadmill or

after each run.

Start a treadmill activity (Starting an Activity, page 4).

Run on the treadmill until your MARQ device records at least

1.5 km (1 mi.).

After you complete your run, press STOP.

Select an option:

• To calibrate the treadmill distance the first time, select

Save.

The device prompts you to complete the treadmill

calibration.

• To manually calibrate the treadmill distance after the first-

time calibration, select Calibrate & Save > Yes.

Check the treadmill display for the distance traveled, and

enter the distance on your device.

Recording a Strength Training Activity

You can record sets during a strength training activity. A set is

multiple repetitions (reps) of a single move.

From the watch face, press START.

Select Strength.

The first time you record a strength training activity, you must

select which wrist your watch is on.

Press START to start the set timer.

Start your first set.

The device counts your reps. Your rep count appears when

you complete at least four reps.

TIP: The device can only count reps of a single move for

each set. When you want to change moves, you should finish

the set and start a new one.

Press LAP to finish the set.

Activities and Apps 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin MARQ Golfer Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin MARQ Golfer

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info