Bedienungsanleitung Garmin Montana 700 serie (Seite 6 von 34) (Englisch)

740418

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Plug the small end of the USB cable into the USB port on

your device.

Plug the large end of the USB cable into an AC adapter or a

computer USB port.

If necessary, plug the AC adapter into a standard wall outlet.

When you connect the device to a power source, the device

turns on.

Charge the battery completely.

TIP: The battery gauge appears in the status bar.

Saving Energy While Charging the Device

Connect your device to an external power source.

Hold the power button until the screen turns off.

The device goes into a low power, battery charging mode,

and the battery gauge appears.

Charge the device completely.

Long-Term Storage

When you do not plan to use the device for several months, you

should charge the battery to at least 50% before you store the

device. You should store the device in a cool, dry place with

temperatures around the typical household level. After storage,

you should fully recharge the device before using it.

Using the Power Button

By default, you can use the power button to turn the device on

and off, turn off the screen, and open the status page. You can

customize the power button functions (Customizing the Power

Button, page 19).

• Press to turn on the device.

• Press to open the status page.

• Press twice to turn off the screen.

TIP: You can press to turn the screen back on.

• Hold to turn off the device.

Viewing the Status Page

The status page displays the current activity recording,

Bluetooth

and Wi‑Fi

connection status, and provides quick

access to frequently used functions such as marking waypoints,

locking the touchscreen, and adjusting the backlight brightness.

Press or swipe down from the top of the screen to open

the status page.

Adjusting the Backlight

Extensive use of screen backlighting can significantly reduce

battery life. You can adjust the backlight brightness to maximize

the battery life.

NOTE: The backlight brightness may be limited when the

remaining battery power is low.

Press to open the status page.

Use the slider to adjust the backlight brightness.

Using the Touchscreen

• Tap the screen to select an item.

• Make each touchscreen selection a separate action.

• Select to save your changes and close the page.

• Select to close the page.

• Select to return to the previous page.

• Select to return to the main menu.

• Select to view specific menu items for the page you are

viewing.

Locking the Touchscreen

You can lock the screen to prevent inadvertent screen touches.

Press to open the status page.

Select .

Unlocking the Touchscreen

Press .

Activating the Device

WARNING

Before you can use the inReach features of your Montana 700i/

750i device, you must activate it (inReach Features, page 3).

Create an account, and select a satellite subscription at

explore.garmin.com.

Turn on the device.

Select Next.

Follow the on-screen instructions.

NOTE: You must enter the device IMEI number and

authorization code to complete the online portion of activation

before you go outdoors.

Go outdoors to an open area with a clear view of the sky, and

point the antenna on the device toward the sky for optimal

performance.

Wait while the device communicates with the Iridium satellite

network.

NOTE: It may take up to 20 minutes to activate your device.

The device must send and receive several messages, which

takes longer than sending a single message during regular

use. You should remain outdoors until activation completes.

Iridium Satellite Network

Your device requires a clear view of the sky to transmit

messages and track points over the Iridium satellite network.

Without a clear view of the sky, your device attempts to send the

information until it acquires satellite signals.

TIP: For the best connection with satellites, hold the device with

the antenna pointed toward the sky.

Acquiring Satellite Signals

It may take 30 to 60 seconds to acquire satellite signals.

Go outdoors to an open area.

If necessary, turn on the device.

Wait while the device searches for satellites.

flashes while the device determines your GNSS location.

in the status bar shows the satellite signal strength.

When the device acquires satellite signals, it automatically starts

recording your path as an activity.

Status Icons

ANT+

sensor status

GPS signal strength

Charging battery

2 Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Montana 700 serie Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Montana 700 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info