Bedienungsanleitung Garmin Montana 700 serie (Seite 24 von 34) (Englisch)

740418

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Notifications: Shows or hides smartphone notifications.

Forget Phone: Removes the connected device from the list of

paired devices. This option is available only after a device is

paired.

Wi‑Fi Settings

Select Setup > Wi-Fi.

Wi-Fi: Enables wireless technology.

Add Network: Allows you to scan for and connect to a wireless

network.

Routing Settings

The available routing settings vary based on whether Direct

Routing is enabled or disabled.

Select Setup > Routing.

Direct Routing: Enables or disables direct routing. Direct

routing calculates the most direct route possible to the

destination.

Activity: Sets an activity while routing. The device calculates

routes optimized for the type of activity you are doing.

Calculation Method: Sets the method used to calculate your

route.

Lock On Road: Locks the blue triangle, which represents your

position on the map, onto the nearest road. This is most

useful when driving or navigating on roads.

Off Route Recalculation: Sets recalculation preferences when

navigating away from an active route.

Avoidance Setup: Sets the types of roads, terrain, and

transportation methods to avoid while navigating.

Route Transitions: Sets how the device routes from one point

on the route to the next. This setting is available only for

some activities. The Distance option routes you to the next

point on the route when you are within a specified distance of

your current point.

Turning On Expedition Mode

You can use expedition mode to prolong the battery life. In

expedition mode, the screen shuts off, the device enters low

power mode, and the device collects fewer GPS track points.

Select Setup > Expedition Mode.

Select an option:

• To enable the device to prompt you to turn on expedition

mode when you turn off the device, select Prompted.

• To automatically turn on expedition mode after two

minutes of inactivity, select Auto.

• To never turn on expedition mode, select Never.

In expedition mode, the green LED flashes occasionally.

Setting the Device Tones

You can customize tones for messages, turn warnings, and

alarms.

Select Setup > Tones > Tones > On.

Select a tone for each audible type.

Camera Settings

Select Setup > Camera.

Photo Resolution: Sets the resolution of the photos.

Save Photos To: Sets the photo storage location.

Camera Instructions: Displays brief instructions about taking

photos.

Geocaching Settings

Select Setup > Geocaching.

Geocaching Live: Allows you to remove live geocache data

from your device and remove your device registration from

geocaching.com (Removing Live Geocache Data from the

Device, page 17, Removing Your Device Registration From

Geocaching.com, page 17).

Geocache Style: Sets the device to display the geocache list

using names or codes.

chirp Searching: Allows the device to search for a geocache

containing a chirp accessory (Enabling chirp Searching,

page 17).

Program chirp: Programs the chirp accessory.

Filter Setup: Allows you to create and save custom filters for

geocaches (Saving a Custom Geocache Filter, page 16).

Found Geocaches: Allows you to edit the number of geocaches

found. This number automatically increases when you log a

find (Logging the Attempt, page 16).

Wireless Sensors

Your device can be used with wireless ANT+ or Bluetooth

sensors. For more information about compatibility and

purchasing optional sensors, go to buy.garmin.com.

Sensors Settings

Select Setup > Sensors.

Fitness: Allows you to pair fitness accessories, including a heart

rate monitor or speed and cadence sensors.

Tempe Sensor: Allows you to pair a tempe

™

temperature

sensor.

XERO: Allows you to enable or disable your sharing status and

make sharing public or private.

NOTE: You can share your location from a compatible Xero

device.

DogTrack: Allows you to receive data from a compatible

handheld dog tracking device (Dog Tracking, page 15).

inReach Remote: Allows you to enable or disable the inReach

remote function and device verification for your Montana

700i/750i device.

NOTE: You can pair a compatible Garmin device and use it

to remotely send messages from your Montana 700i/750i

device.

Pairing Your Wireless Sensors

Before you can pair, you must put on the heart rate monitor or

install the sensor.

Pairing is the connecting of wireless sensors using ANT+ or

Bluetooth technology, for example, connecting a heart rate

monitor with your device.

Bring the device within 3 m (10 ft.) of the sensor.

NOTE: Stay 10 m (33 ft.) away from other sensors while

pairing.

Select Setup > Sensors.

Select your sensor type.

Select Search For New.

When the sensor is paired with your device, the sensor status

changes from Searching to Connected.

Fitness Settings

Select Setup > Fitness.

Auto Lap: Sets the device to automatically mark the lap at a

specific distance.

User: Sets your user profile information. The device uses this

information to calculate accurate training data in Garmin

Connect.

HR Zones: Sets the five heart rate zones and your maximum

heart rate for fitness activities.

Marking Laps by Distance

You can use Auto Lap

to automatically mark the lap at a

specific distance. This feature is helpful for comparing your

performance over different parts of an activity.

20 Customizing the Device

Garmin Montana 700 serie Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Montana 700 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info