Bedienungsanleitung Garmin Montana 750i (Seite 10 von 34) (Englisch)

740421

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Set Scale: Sets the scale for the distance between the dots on

the course deviation indicator.

Calibrate Compass: Allows you to calibrate the compass if you

experience irregular compass behavior, for example, after

moving long distances or after extreme temperature changes

(Calibrating the Compass, page 6).

Heading Setup: Allows you to customize the compass heading

settings (Heading Settings, page 6).

Lock Data Fields: Locks the data fields. You can unlock the

data fields to customize them.

Restore Defaults: Restores the compass to factory default

settings.

Navigating with Sight 'N Go

You can point the device at an object in the distance with the

compass direction locked in, project the object as a waypoint,

and navigate using the object as a reference point.

From the compass, select > Sight 'N Go.

Point the device at an object.

Select Lock Direction > Set Course.

Navigate using the compass.

Calibrating the Compass

Before you can calibrate the electronic compass, you must be

outdoors, away from objects that influence magnetic fields, such

as cars, buildings, or overhead power lines.

The device has a 3-axis electronic compass. You should

calibrate the compass after moving long distances or

experiencing temperature changes.

From the compass, select .

Select Calibrate Compass > Start.

Follow the on-screen instructions.

Heading Settings

From the compass, select , and select Heading Setup.

Display: Sets the type of directional heading shown on the

compass.

North Reference: Sets the north reference used on the

compass.

Go To Line (Pointer): Sets the behavior of the pointer that

appears on the map. Bearing points in the direction of your

destination. Course (CDI) shows your relationship to the

course line leading to the destination.

Compass: Automatically switches from an electronic compass

to a GPS compass when you are traveling at a higher rate of

speed for a period of time.

Calibrate Compass: Allows you to calibrate the compass if you

experience irregular compass behavior, for example, after

moving long distances or after extreme temperature changes

(Calibrating the Compass, page 6).

Course Pointer

The course pointer is most useful when you are navigating to

your destination in a straight line, such as when you are

navigating on water. It can help you navigate back to the course

line when you go off-course to avoid obstacles or hazards.

To enable the course pointer, from the compass, select >

Heading Setup > Go To Line (Pointer) > Course (CDI).

Course line pointer. Indicates the direction of the desired course

line from your starting point to your next waypoint.

Course deviation indicator (CDI). Indicates the location of the

desired course line in relation to your location. If the CDI is aligned

with the course line pointer, you are on course.

Course deviation distance. The dots indicate your distance off

course. The distance represented by each dot is indicated by the

scale in the upper-right corner.

To-and-from indicator. Indicates whether you are headed to or from

the next waypoint.

Trip Computer

The trip computer displays your current speed, average speed,

trip odometer, and other helpful statistics. You can customize

the trip computer layout, dashboard, and data fields.

Trip Computer Settings

From the trip computer, select .

Reset: Resets all the trip computer values to zero. For accurate

information, reset the trip information before beginning a trip.

Change Dashboard: Changes the theme and information

displayed on the dashboard.

NOTE: Your customized settings are remembered by the

dashboard. Your settings are not lost when you change

profiles (Profiles, page 21).

Lock Data Fields: Locks the data fields. You can unlock the

data fields to customize them.

Insert Page: Inserts an additional page of customizable data

fields.

Remove Page: Removes an additional page of customizable

data fields.

More Data: Adds additional data fields to the trip computer.

Less Data: Removes data fields from the trip computer.

Restore Defaults: Restores the trip computer to its factory

default settings.

Altimeter

By default, the altimeter plot displays the elevation over the

distance traveled. You can customize the altimeter settings

(Altimeter Settings, page 6). You can select any point on the

plot to view details about that point.

You can customize the favorites bar to add the altimeter page

(Customizing the Favorites Bar, page 21).

Altimeter Plot Settings

From the altimeter, select .

Reset: Resets the altimeter data, including waypoint, track, and

trip data.

Altimeter Setup: Enables you to open additional altimeter

settings (Altimeter Settings, page 6).

Restore Defaults: Restores the altimeter to factory default

settings.

Altimeter Settings

From the altimeter, select > Altimeter Setup.

Auto Calibration: Once allows the altimeter to automatically

calibrate one time when you start an activity. Continuous

allows the altimeter to calibrate throughout the duration of

your activity.

Barometer Mode: Variable Elevation allows the barometer to

measure changes in elevation while you are moving. Fixed

Elevation assumes the device is stationary at a fixed

elevation, so the barometric pressure should only change

due to weather.

Pressure Trending: Sets how the device records pressure

data. Save Always records all pressure data, which can be

helpful when you are watching for pressure fronts.

6 Viewing the Main Pages

Garmin Montana 750i Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Montana 750i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info