Bedienungsanleitung Garmin Oregon 650 (Seite 17 von 22) (Englisch)

590071

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Enter a distance, and select .

Resetting Data

You can reset trip data, delete all waypoints, clear the current

track, or restore default values.

Select Setup > Reset.

Select an item to reset.

Restoring Default Values for Specific Settings

Select Setup.

Select an item to reset.

Select > Restore Defaults.

Restoring Default Values for Specific Page Settings

You can restore the default values for settings for the map,

compass, trip computer, and elevation plot.

Open the page for which you will restore the settings.

Select > Restore Defaults.

Restoring All Default Settings

You can reset all settings back to the factory default settings.

Select Setup > Reset > Reset All Settings > Yes.

Device Information

Battery Information

WARNING

The temperature rating for the device may exceed the usable

range of some batteries. Alkaline batteries can rupture at high

temperatures.

Do not use a sharp object to remove batteries.

CAUTION

Contact your local waste disposal department to properly

recycle the batteries.

NOTICE

Alkaline batteries lose a significant amount of their capacity as

the temperature decreases. Therefore, use lithium batteries

when operating the device in below freezing conditions.

Maximizing the Battery Life

You can do several things to extend the life of the batteries.

• Reduce the backlight brightness (Adjusting the Backlight

Brightness).

• Reduce the backlight timeout (Display Settings).

• Use battery save mode (Turning On Battery Save Mode).

• Decrease the map drawing speed (Map Settings).

• Exit the camera application when you are not taking photos.

Turning On Battery Save Mode

You can use battery save mode to prolong the battery life.

Select Setup > Display > Battery Save > On.

In battery save mode, the screen shuts off when the backlight

times out. You can select to turn on the screen, and you can

double tap to view the status page.

Saving Energy While Charging the Device

You can turn off the device display and all other features while

charging.

Connect your device to an external power source.

The remaining battery capacity appears.

Hold the power key for 4 to 5 seconds.

The display turns off, and the device goes into a low power,

battery charging mode.

Charge the device completely.

Long-Term Storage

When you do not plan to use the device for several months,

remove the batteries. Stored data is not lost when batteries are

removed.

Device Care

NOTICE

Do not store the device where prolonged exposure to extreme

temperatures can occur, because it can cause permanent

damage.

Never use a hard or sharp object to operate the touch screen,

or damage may result.

Avoid chemical cleaners and solvents that can damage plastic

components.

Secure the weather cap tightly to prevent damage to the mini-

USB port.

Cleaning the Device

Wipe the device with a cloth dampened with a mild detergent

solution.

Wipe it dry.

Cleaning the Touchscreen

Use a soft, clean, lint-free cloth.

If necessary, lightly dampen the cloth with water.

If using a dampened cloth, turn off the device and disconnect

the device from power.

Gently wipe the screen with the cloth.

Water Immersion

NOTICE

The device is waterproof to IEC Standard 60529 IPX7. It can

withstand immersion in 1 meter of water for 30 minutes.

Prolonged submersion can cause damage to the device. After

submersion, be certain to wipe dry and air dry the device before

using or charging.

Specifications

Battery type NiMH battery pack or two AA batteries

(NiMH, alkaline, or lithium)

Battery life Up to 16 hrs.

Water rating IEC 60529 IPX7*

Operating temperature

range

From 5º to 158ºF (from -15º to 70ºC)

Charging temperature

range

From 32º to 113°F (0º to 45°C)

Radio frequency/protocol 2.4 GHz ANT+ wireless communications

protocol

Bluetooth enabled device

Compass-safe distance 7 in. (17.5 cm)

*The device withstands incidental exposure to water of up to

1 m for up to 30 min.

Data Management

NOTE: The device is not compatible with Windows 95, 98, Me,

Windows NT

, and Mac OS 10.3 and earlier.

File Types

The handheld device supports these file types:

• Files from BaseCamp or HomePort™. Go to

www.garmin.com/trip_planning.

Device Information 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Oregon 650 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Oregon 650

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info