Bedienungsanleitung Garmin Overlander (Seite 18 von 30) (Englisch)

691036

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

and allow the readings to stabilize after significant changes in

environmental conditions. Always allow a margin of safety for

changing conditions and reading errors. Failure to account for

your vehicle and your environment could cause an incident

resulting in death or serious injury.

The device alerts you if your vehicle pitches or rolls at an angle

that could affect the vehicle's stability.

Calibrating Pitch and Roll

You can set the angle of your vehicle to zero at any time.

Park your vehicle on a flat, level surface.

Adjust the position of your device in the mount so you can

comfortably view the screen.

Select > > Pitch and Roll > Calibrate.

The values for pitch and roll reset to 0 degrees.

WARNING

To maintain the best accuracy, you must calibrate pitch and roll

each time you reposition your device.

Adjusting Warning Angles

You can adjust the angles at which the device activates a pitch

or roll alert. You are responsible for knowing and setting the

correct pitch and roll angle for your vehicle.

Select > > Pitch and Roll > > Warning Angles.

Swipe up or down to adjust the pitch or roll warning angles.

Select Accept.

Enabling or Disabling Warning Angle Alerts

Select > > Pitch and Roll > .

Select an option:

• To enable or disable pitch and roll notifications, select

Pitch and Roll Notifications.

• To enable or disable audible alerts, select Audible Alerts.

Viewing the Altimeter, Barometer, and

Compass

The device contains internal altimeter, barometer, and compass

sensors with automatic calibration.

Select > > ABC.

Calibrating the Compass

NOTICE

Calibrate the electronic compass outdoors. To improve heading

accuracy, do not stand near metal objects or objects that

influence magnetic fields, such as vehicles, electronic devices,

buildings, or overhead power lines.

When your device is connected to the magnetic mount, it uses

GPS data to determine your compass heading. When you

remove the device from the magnetic mount, it uses a built-in

compass to show your heading.

Each time you disconnect your device from the magnetic mount,

the device prompts you to calibrate the compass. If you

experience irregular compass behavior, for example, after

moving long distances or after extreme temperature changes,

you can manually calibrate the compass to improve accuracy.

Disconnect the device from the magnetic mount and move

away from objects that influence magnetic fields.

Select > Calibrate Compass.

Follow the on-screen instructions.

inReach Remote

The inReach remote function allows you to control your inReach

device using your Overlander device. You can send messages,

view weather reports, trigger an SOS alert, and more. Go to

buy.garmin.com to purchase an inReach device.

Connecting an inReach Device

Bring the inReach device within 3 m (10 ft.) of your

Overlander device.

On your Overlander device, select .

Select the Explore tab.

Select inReach.

Follow the on-screen instructions on your Overlander device

to complete the pairing process.

After the pairing process is complete, the inReach and

Overlander devices connect automatically when they are within

range.

Sending an inReach Message

Before you can send an inReach message using your

Overlander device, you must pair it with a compatible inReach

device (Connecting an inReach Device, page 14).

You can use your device to send inReach messages to your

contacts.

Select > > inReach > .

Select to add one or more contacts.

Enter a message.

Select Send.

SOS

During an emergency, you can contact the GEOS International

Emergency Rescue Coordination Center (IERCC) to request

help. Pressing the SOS button sends a message to the rescue

coordination center, and they notify the appropriate emergency

responders of your situation. You can communicate with the

rescue coordination center during your emergency while you

wait for help to arrive. You should only use the SOS function in a

real emergency situation.

Initiating an SOS Rescue

Before you can initiate an SOS rescue using your Overlander

device, you must pair it with a compatible inReach device

(Connecting an inReach Device, page 14).

NOTE: While in SOS mode, the inReach device cannot be

turned off.

Select > > inReach > > SOS.

Slide the SOS icon to the right.

Wait for the SOS countdown.

The device sends a default message to the emergency

response service with details about your location.

Reply to the confirmation message from the emergency

response service.

Your reply lets the emergency response service know that

you are capable of interacting with them during the rescue.

For the first 10 minutes of your rescue, an updated location is

sent to the emergency response service every minute. To

conserve battery power after the first 10 minutes, an updated

location is sent every 10 minutes when moving, and every 30

minutes when stationary.

Canceling an SOS Rescue

If you no longer need assistance, you can cancel an SOS

rescue after it is sent to the emergency response service.

Select Cancel SOS > Cancel SOS.

14 inReach Remote

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Overlander Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Overlander

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info