Bedienungsanleitung Garmin PRO 550 (Seite 7 von 8) (Englisch)

589670

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Install the new battery into the back plate with the label side

up, using the same orientation as the old battery.

The battery orientation is noted graphically inside the back

plate.

Replace the battery plate to its original position.

Replace and tighten the battery plate screws.

With the new battery, connect the battery connector to the

device.

When properly installed, the connector plug snaps into the

port.

Reconnect the rotary switch connector to the device.

When properly installed, the connector plug snaps into the

port.

Verify the gasket is not damaged and is completely seated in

the groove on the front half of the device.

While ensuring the battery and rotary switch wires are not

pinched, hold the back plate and the device firmly together,

and replace all eight security screws without tightening.

Verify the back plate and the device are aligned with no

gaps.

Tighten the screws evenly.

Verify the gasket is not sticking out of the device.

Pro 550 Dog Collar Device Components

Security screws

Top plate

Battery plate screws

Battery plate

Battery

Gasket

Front enclosure

Replacing the Pro 550 Dog Collar Device Battery

Before you replace the battery, you must remove all dirt, water,

and debris from the device. You also need a small Phillips

screwdriver and the security screwdriver included with the

battery replacement kit.

You can purchase a replacement battery at

http://buy.garmin.com. You should use only an official Garmin

replacement part.

Remove the six screws from the top plate, and remove the

top plate.

Remove the two screws from the battery plate, and remove

the battery plate.

Grip the battery connector wires close to the connector, and

pull the connector parallel to the circuit board to disconnect

the battery connector from the device.

Remove the battery.

The battery fits tightly. It may be necessary to pry the battery

out of the back plate using a non-sharp, non-metal object.

Install the new battery into the front enclosure with the label

side of the battery facing up, and the leading edge of the

battery placed under the charging contact ledge of the

device.

Replace the battery plate, and replace and tighten the two

screws.

Verify the gasket is not damaged and is completely seated in

the groove.

With the new battery, connect the battery connector to the

device.

When properly installed, the connector plug snaps into the

port.

Replace the front plate, and replace and tighten the six

screws to secure the front plate.

Verify the gasket is not sticking out of the device.

Getting More Information

You can find more information about this product on the Garmin

website.

• Go to www.garmin.com/outdoor.

• Go to www.garmin.com/learningcenter.

• Go to http://buy.garmin.com, or contact your Garmin dealer

for information about optional accessories and replacement

parts.

Registering Your Device

Help us better support you by completing our online registration

today.

• Go to http://my.garmin.com.

• Keep the original sales receipt, or a photocopy, in a safe

place.

Device Information 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin PRO 550 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin PRO 550

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info