Bedienungsanleitung Garmin PRO Control 2 (Seite 9 von 14) (Englisch)

657470

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Wiggle the device to work the contact points through the

dog's coat.

NOTE: The contact points must have contact with the dog's

skin to be effective.

If the strap is too long, cut off the excess, leaving at least

8 cm (3 in.) to spare.

TIP:

You can mark the hole used to fasten the buckle for

future reference.

Pairing a Dog Collar Device with the Handheld Device

Turn on the dog collar device and the handheld device.

On the handheld device, select to select a color.

indicates the selected color.

On the handheld device, select an intensity level greater than

(

Changing the Intensity Level,

page

6).

On the dog collar device, hold the power key.

You must continue to hold the power key during the pairing

process.

The device beeps once when you select the power key and

again after five seconds.

After the second beep, select a training key on the handheld

device.

The dog collar device turns off and beeps to indicate that the

devices paired successfully.

Short beep Devices paired successfully

Long beep Devices did not pair

TIP:

If the devices did not pair successfully, you should verify

the batteries in both devices are fully charged and the intensity

level is greater than 0.

Selecting a Dog Collar Device

Before you can select and control a dog collar device, you must

pair the dog collar device with the handheld device (Pairing a

Dog Collar Device with the Handheld Device, page 5)

Select

to choose the color.

indicates the selected color.

The training keys control the dog collar device associated with

the selected color.

Training Intensities and Methods

You can use several methods to train your dog. The PRO

Control system provides 18

stimulation intensity levels, which

increase sequentially from 1 to 18.

Momentary stimulation

: Applies a brief stimulation when you

press the training key, regardless of how long the key is

depressed.

Continuous stimulation: Applies stimulation to the dog the

entire time you press the training key, for a maximum of 8

seconds. Your stimulations should typically be much shorter

than 8 seconds.

Tone: Activates an audible tone the entire time you press the

training key, for a maximum of 8 seconds. A tone can be

used as either a positive or negative training cue, depending

on your training program.

Vibration: Applies vibration instead of stimulation to the dog the

entire time you press the training key, for a maximum of 8

seconds. The effectiveness of vibration may vary based on

the dog's temperament and experience.

Training Modes

The

PRO Control system provides several training modes,

which assign different combinations of momentary stimulation,

continuous stimulation, tone, and vibration to the training keys

(Training Intensities and Methods,

page

. The three vertical

letters on the LCD display correspond to the training key

functions, from top to bottom. Some modes provide keys

designated for high or low stimulations for different training

purposes. A low stimulation is perceived by the dog to be less

intense than a high stimulation.

Mode Top Key Middle Key Bottom Key Description

TVM Tone Vibration Momentary

(low)

Beginning trainer,

sensitive dog, or

minor corrections

VCM Vibration Continuous

(high)

Momentary

(high)

All-around training

TCM Tone Continuous

(high)

Momentary

(high)

All-around training

CMM Continuous

(high)

Momentary

(high)

Momentary

(low)

Advanced

training, popular

for bird-dog

training

MCC Momentary

(high)

Continuous

(high)

Continuous

(low)

Advanced

training, popular

for obedience

training

Selecting a Training Mode

You can select a training mode that applies to all three dog

collar devices.

Select a dog collar device (Selecting a Dog Collar Device,

page 5)

Select

RAPID LAUNCH to move through the available

training modes.

Choosing the Correct Intensity Level

Set the intensity to the lowest level (Changing the Intensity

Level

, page

6).

Press a training key.

Observe the dog for a reaction, such as a head shake, neck

movement, or just a change in expression.

Sometimes dogs will vocalize due to the surprise of the

electrical stimulation. If the dog vocalizes more than once,

the intensity level is too high for beginning training.

If there is no reaction, increase the intensity level by one level

until the dog has a slight but recognizable reaction to the

stimulation.

The intensity level that causes a slight but recognizable reaction

is your dog's baseline level for beginning collar training. You do

not need to, and should not, apply this intensity selection test

again.

After you begin training, the dog’s performance guides your

intensity selection. As the dog advances in training, you may

need to change the level depending upon the training situation.

Dog Training 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin PRO Control 2 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info