Bedienungsanleitung Garmin Quatix (Seite 12 von 22) (Englisch)

522252

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

When the devices are paired, the autopilot screen appears

on the quatix.

After your device is paired with your autopilot, it automatically

reconnects with your autopilot every time it is within range.

NOTE: To pair with a different autopilot, hold and to reset

the existing autopilot pair, and repeat steps 2 and 3.

Using Autopilot

Before you can use the quatix to control an autopilot, you must

install and configure a compatible Garmin GHP™ autopilot

system and pair your quatix with the GHC device. For more

information, see the owner's manual for your autopilot.

Select the blue key.

Select Autopilot.

Select an option:

• To engage the autopilot heading hold, hold a steady

course, select Engage, and release the helm.

• To change the heading in 1° increments, with the autopilot

engaged, select for port and for starboard.

• To perform a step turn, with the autopilot engaged, hold

for port and for starboard.

• To activate a preset action, select Presets, and select a

button action. A graphic displays a plot of the action

performed by the button.

• To take the helm, select Standby.

• To view the clock and data pages, select .

NOTE: To quickly disengage the autopilot while viewing

the clock or data pages, select the blue key, and select

Standby.

Clock

Setting the Alarm

Select the blue key.

Select Clock > Alarm Clock > Add Alarm.

Use the blue key, , and to set the time.

Select Tone, Vibration, or Tone & Vib..

Select Once, Daily, or Weekdays.

Starting the Countdown Timer

Select the blue key.

Select Clock > Timer.

Use the blue key, , and to set the time.

If necessary, select Notification, and select an option.

Select Start.

Using the Stopwatch

Select the blue key.

Select Clock > Stopwatch.

Select Start.

Adding a Custom Time Zone

Select the blue key.

Select Clock > Alt. Zones > Add Zone.

Select a time zone.

The custom time zone page is added to the current profile.

Editing a Custom Time Zone

Select the blue key.

Select Clock > Alt. Zones.

Select a time zone.

Select an option:

• To change the time zone, select Edit Zone.

• To customize the name of the time zone, select Edit

Label.

Alerts

You can set the device to alert you in many different situations

where your awareness of the surrounding conditions or other

data is important. There are three types of alerts: event alerts,

range alerts, and recurring alerts.

Event alert: An event alert notifies you once. The event is a

specific value. For example, you can set the device to alert

you when you reach a specified elevation.

Range alert: A range alert notifies you every time the device is

above or below a specified range of values. For example,

you can set the device to alert you when your speed is below

5 knots and over 15 knots.

Recurring alert: A recurring alert notifies you every time the

device records a specified value or interval. For example,

you can set the device to alert you every 30 minutes.

Alert Name Alert Type Description

Anchor Drag Event You can set a maximum distance for

your vessel to drift after dropping anchor.

Proximity Recurring See page 8.

Distance Event,

recurring

You can set an interval or a custom

distance from your final destination.

Time Event,

recurring

You can set an interval or a custom time

from your estimated time of arrival.

Elevation Event, range,

recurring

You can set minimum and maximum

elevation values. You can also set the

device to alert you when you ascend or

descend a specified amount.

Nav. Arrival Event You can set alerts for reaching waypoints

and the final destination of a track or

route.

Speed Range You can set minimum and maximum

speed values.

Battery Event You can set a minimum battery power

value.

Setting a Proximity Alarm

Proximity alarms alert you when you are within a specified

range of a particular location.

Select the blue key.

Select Alerts > Proximity > Edit > Create New.

Select a location.

Enter a radius.

Select Done.

Navigating with Sight 'N Go

You can point the device at an object in the distance, such as a

water tower, lock in the direction, and navigate to the object.

Select the blue key.

Select GPS Tools > Sight 'N Go.

Point the blue marks on the bezel at an object.

Select the blue key.

8 Applications

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Quatix Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Quatix

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info