Bedienungsanleitung Garmin RV890 (Seite 26 von 32) (Englisch)

740395

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

The mount does not hold my device in place

while I drive

For the best results, you should keep the vehicle mount clean

and position the device close to the suction cup.

If the device shifts position while you are driving, you should

complete these actions.

• Remove the powered mount from the suction cup arm, and

wipe the ball and socket with a cloth.

Dust and other debris may reduce the friction in the ball and

socket joint and allow the joint to shift while you are driving.

• Rotate the hinged arm toward the suction cup as far as your

windshield angle allows.

Positioning the device closer to the windshield reduces the

effect of jarring and vibration from the road.

My device is not acquiring satellite signals

• Verify the location services feature is enabled (Enabling or

Disabling Location Services, page 19).

• Take your device out of parking garages and away from tall

buildings and trees.

• Remain stationary for several minutes.

The device does not charge in my vehicle

• Check the fuse in the vehicle power cable.

• Verify the vehicle is turned on and is supplying power to the

power outlet.

• Verify the interior temperature of the vehicle is within the

charging temperature range indicated in the specifications.

• In the vehicle fuse box, verify the fuse for the vehicle power

outlet is not broken.

My battery does not stay charged for very

long

• Decrease the screen brightness (Display Settings, page 19).

• Shorten the display timeout (Display Settings, page 19).

• Decrease the volume (Adjusting Sound and Notification

Volume, page 19).

• Put the device in power saving mode when not in use

(Turning the Device On or Off, page 2).

• Keep your device away from extreme temperatures.

• Do not leave your device in direct sunlight.

My device does not connect to my phone

• Select Settings > Wireless Networks > Bluetooth.

The Bluetooth option must be enabled.

• Enable Bluetooth wireless technology on your phone and

bring your phone within 10 m (33 ft.) of the device.

• Verify your phone is compatible.

Go to www.garmin.com/bluetooth for more information.

• Complete the pairing process again.

To repeat the pairing process, you must unpair your phone

and device (Deleting a Paired Bluetooth Device, page 14),

and complete the pairing process.

Appendix

Backup Cameras

Your device can display the video feed from one or more

connected backup cameras.

Pairing a BC

™

35 Backup Camera with a Garmin

Navigation Device

You must enable the Wi‑Fi setting on your Garmin navigation

device before you can connect to a camera.

The BC 35 wireless backup camera is compatible with some

Garmin navigation devices with Android. Go to garmin.com/bc35

for more information about device compatibility.

You can pair up to four BC 35 wireless backup cameras with

your compatible Garmin navigation device.

Update your navigation device to the latest software.

Your device may not support the BC 35 camera without the

latest software. For more information about updating, see the

owner's manual for your navigation device.

Turn on the Garmin navigation device, and bring it within 3 m

(10 ft.) of the camera.

Select > Tools > Cameras > > Garmin BC35.

Select your BC 35 camera from the list of available cameras.

NOTE: The pairing code or password is located on the

transmitter of the camera.

Select Setup, and position the guidance lines using the on-

screen arrows.

If the camera or vehicle is not ideally positioned to complete

the guidance line alignment, you can complete the alignment

later.

Select Save.

After you complete the pairing process with a camera for the first

time, it connects automatically to the Garmin navigation device.

Connecting a Wired Backup Camera

To connect a wired backup camera, you must purchase an

optional video mount accessory, which includes a 3.5 mm

composite video input jack. Go to garmin.com to purchase an

accessory mount. The video mount accessory is included with

some device models.

You can connect a wired backup camera and view the output on

the device screen.

Replace the original device mount with the video mount

accessory.

Plug the camera video cable into the video input jack on

the mount.

Viewing the Backup Camera

Your device shows video from the connected backup camera in

different ways, depending on how the camera is connected to

power.

Select an option to show video:

• If the camera is connected to a reverse lamp

(recommended), place the vehicle into reverse.

The device automatically shows video from the backup

camera.

• If the camera is connected to a steady power source,

select > Tools > Cameras to manually view the

camera.

22 Appendix

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin RV890 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin RV890

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info