Bedienungsanleitung Garmin SteadyCast (Seite 1 von 4) (Englisch)

691896

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

STEADYCAST™ HEADING SENSOR

Installation Instructions

Important Safety Information

CAUTION

Always wear safety goggles, ear protection, and a dust mask

when drilling, cutting, or sanding.

NOTICE

When drilling or cutting, always check what is on the opposite

side of the surface.

Registering Your Device

Help us better support you by completing our online registration

today.

• Go to my.garmin.com.

• Keep the original sales receipt, or a photocopy, in a safe

place.

Tools Needed

• Safety glasses

• Drill

• 3.2 mm (

in.) drill bit (a larger pilot hole drill bit may be

required for hard or brittle mounting surfaces)

• 25 mm (1 in.) drill bit for a cable-passthrough hole (optional)

• Phillips screwdriver

• Cable ties

• Portable or handheld compass (to test for magnetic

interference)

• Additional screws appropriate for the mounting surface, if

needed

Software Update

You should update the software on all of your Garmin

devices

when you install this device.

The software update requires a Garmin NMEA 2000

Network

Updater accessory or a Garmin chartplotter connected over the

NMEA 2000 network (sold separately).

Garmin devices support up to a 32 GB memory card, formatted

to FAT32.

Loading the New Software on a Memory Card

You must copy the software update to a memory card using a

computer that is running Windows

software.

NOTE: You can contact Garmin customer support to order a

preloaded software update card if you do not have a computer

with Windows software.

Insert a memory card into the card slot on the computer.

Go to www.garmin.com/support/software/marine.html.

Select GPSMAP Series with SD Card.

Select Download next to GPSMAP Series with SD Card.

Read and agree to the terms.

Select Download.

Choose a location, and select Save.

Double-click the downloaded file.

Select Next.

Select the drive associated with the memory card, and select

Next > Finish.

A Garmin folder containing the software update is created on the

memory card. The software update can take several minutes to

load onto the memory card.

Updating the Device Software

Before you can update the software, you must obtain a

software-update memory card or load the latest software onto a

memory card.

Turn on the chartplotter.

After the home screen appears, insert the memory card into

the card slot.

NOTE: In order for the software update instructions to

appear, the device must be fully booted before the card is

inserted.

Follow the on-screen instructions.

Wait several minutes while the software update process

completes.

When prompted, leave the memory card in place and restart

the chartplotter manually.

Remove the memory card.

NOTE: If the memory card is removed before the device

restarts fully, the software update is not complete.

Mounting Considerations

CAUTION

Do not install or store the sensor near strong magnets, including

speakers. A strong magnetic field can damage the sensor.

You can install the sensor with the cable either routed through

the side of the sensor housing, or with the cable routed through

the mounting surface under the sensor.

For best performance, observe these considerations when

selecting a mounting location.

• The sensor should not be mounted near known ferrous metal

objects such as a toolbox or compass.

• The sensor is not a GPS device, and is not required to have

a clear view of the sky.

• A handheld compass should be used to test for magnetic

interference in the area where the sensor is to be mounted.

Your boat, motors, and devices must be on during the test.

If the needle on the handheld compass moves when you hold

it where you intend to mount the sensor, magnetic

interference is present. You must choose another location

and test again.

• Mounting screws are provided with the sensor. If you use

mounting hardware other than the provided screws, the

hardware must be made of quality stainless steel or brass

material to avoid magnetic interference with the sensor.

NOTE: Test all mounting hardware with a handheld compass

to make sure no magnetic fields are present in the hardware.

• The sensor can be mounted in any orientation, and is not

required to be installed in the same horizontal plane as the

boat.

NOTE: You can set the heading alignment automatically if a

GPS source is connected to the NMEA 2000 network. If you

are not using a compatible Garmin chartplotter, the boat must

be able to reach a cruising speed of at least 6.4 km/h (4

mph). You can set or fine-tune the heading alignment using

Fine Heading Alignment with a compatible Garmin

March 2017

190-02192-02 _ 0A

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin SteadyCast Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin SteadyCast

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info