162076
27
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
Reference
17
Stopped Time The length of time that the vehicle has been stopped (or stationary) during the time the
StreetPilot has been tracking your location since the Trip Computer was last reset.
Total Time
The total length of time that the StreetPilot has been tracking your location since the Trip
Computer was last reset. This is always equal to Driving Time plus Stopped Time.
To reset the Trip Computer or the Maximum Speed:
1. Press the unit or remote MENU key to display a ‘Menu’ page.
You can also select the blue round buttons to the right of the
main odometer or Max Speed (in which case you can skip to
step 3.)
2. From the ‘Menu’ page, select ‘Reset Trip’ to reset the Trip
Computer or ‘Reset Max Spd’ to reset the Maximum Speed.
3. Select ‘Yes’ at the verifi cation page to complete the reset.
To select a Mileage Log:
1. Select the ‘Job 1’ (or ‘None’) fi eld on the Trip Information page. A box containing various log names (Job
1, Job 2, Job 3, OTHER, None) will appear.
2. Select the desired Mileage Log name. All mileage will be recorded in this log.
To rename a Mileage Log:
1. Make certain the desired Mileage Log name is displayed. Then, press the unit or remote MENU key to
display a ‘Menu’ page.
2. Select ‘Rename Log.
3. Enter the new name by using the mini keyboard that will appear.
To reset a Mileage Log:
1. Make certain the desired Mileage Log name is displayed. Then, press the unit or remote MENU key to
display a ‘Menu’ page. You can also select the round blue button to the right of the Mileage log.
2. Select ‘Reset Log’ and select ‘Yes’ at the verifi cation page to complete the reset.
You can reset the Maximum Speed or the Trip Com-
puter by pressing MENU while on the Trip Information
page.
Trip Information Page
Use the mini keyboard to rename a Mileage Log.
Touch the appropriate blue button above to
reset the Trip Computer or Maximum Speed.
190-00257-00_0B.indd 17 3/31/2004, 1:25:19 PM
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Garmin streetpilot 2610 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Garmin streetpilot 2610

Garmin streetpilot 2610 Bedienungsanleitung - Englisch - 95 seiten

Garmin streetpilot 2610 Bedienungsanleitung - Holländisch - 76 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info