Bedienungsanleitung Garmin Striker Plus 4 (Seite 12 von 20) (Englisch)

691434

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Overlay Numbers: Allows you to customize the data shown on

the map.

Garmin Quickdraw Contours Settings

Select Quickdraw Map > > Quickdraw Contours >

Settings.

Display: Displays Garmin Quickdraw Contours. The My

Contours option shows your own Garmin Quickdraw

Contours maps. The Community Contours option shows the

maps you have downloaded from the Garmin Quickdraw

Community.

Recording Offset: Sets the distance between the sonar depth

and the contour recording depth. If the water level has

changed since your last recording, adjust this setting so the

recording depth is the same for both recordings.

For example, if the last time you recorded had a sonar depth

of 3.1 m (10.5 ft.), and today's sonar depth is 3.6 m (12 ft.),

enter -0.5 m (-1.5 ft.) for the Recording Offset value.

User Display Offset: Sets differences in contour depths and

depth labels on your own contours maps to compensate for

changes in the water level of a body of water, or for depth

errors in recorded maps.

Comm. Display Offset: Sets differences in contour depths and

depth labels on the community contours maps to compensate

for changes in the water level of a body of water, or for depth

errors in recorded maps.

Survey Coloring: Sets the color of the Garmin Quickdraw

Contours display. When this setting is turned on, the colors

indicate the quality of the recording. When this setting is

turned off, the contour areas use standard map colors.

Green indicates good depth and GPS position, and a speed

under 16 km/h (10 mph). Yellow indicates good depth and

GPS position, and a speed between 16 and 32 km/h (10 and

20 mph). Red indicates poor depth or GPS position, and a

speed above 32 km/h (20 mph).

Depth Range Shading: Specifies the upper and lower limits of a

depth range and a color for that depth range.

Depth Range Shading

You can set color ranges on your map to show the water depths

where your target fish are currently biting. You can set deeper

ranges to monitor how quickly the bottom depth changes within

a specific depth range. For inland fishing, a maximum of five

depth ranges can help reduce map clutter.

Red From 0 to 1.5 m (from 0 to 5 ft.)

Orange From 1.5 to 3 m (from 5 to 10 ft.)

Yellow From 3 to 4.5 m (from 10 to 15 ft.)

Green From 4.5 to 7.6 m (from 15 to 25 ft.)

Navigation with the STRIKER Plus

WARNING

When navigating, the course may pass over land or shallow

water. Use visual sightings, and steer to avoid land, shallow

water, and other dangerous objects.

You can set and follow a course to a destination using one of

two methods: Go To or Route To.

Go To: Takes you directly to the destination. This is the

standard option for navigating to a destination. The device

creates a straight-line course or navigation line to the

destination. The path may run over land and other obstacles.

Route To: Creates a route from your location to a destination,

allowing you to add turns along the way. This option provides

a straight-line course to the destination, but allows you to add

turns into the route to avoid land and other obstacles.

Searching for a Destination by Name

You can search for saved waypoints, saved routes, saved

tracks, and marine services destinations by name.

Select User Data > xx.

Enter at least a portion of the name of your destination.

If necessary, select Done.

The 50 nearest destinations that contain your search criteria

appear.

Select the destination.

Creating a Waypoint on the Map

From the Quickdraw Map, select a location.

Select .

A list of options appears along the right side of the chart. The

options vary based on the location or object you selected.

Select Create Waypoint.

Navigating to a Waypoint

From the Quickdraw Map, use the arrow keys to select the

waypoint.

The waypoint name appears on the screen.

Select .

Select Navigate To > Go To.

Creating and Navigating a Route Using the

Map

The starting point can be your present location or another

location on the map.

Select User Data > Routes > New > Route Using Chart.

Pan the map to select the starting location of the route.

Select to add a turn to the route.

Repeat to add all of the turns in the route.

Select > Navigate To.

Select an option.

Stopping Navigation

From the map, select > Stop Navigation.

Waypoints

Waypoints are locations you record and store in the device.

Marking Your Present Location as a Waypoint

From any screen, select .

Creating a Waypoint at a Different Location

Select User Data > Waypoints > New Waypoint.

8 Navigation with the STRIKER Plus

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Striker Plus 4 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Striker Plus 4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info