Bedienungsanleitung Garmin Striker Plus 9 (Seite 14 von 20) (Englisch)

691437

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

A magenta line appears. In the center of the magenta line is

a thinner purple line that represents the corrected course

from your present location to the destination. The corrected

course is dynamic, and it moves with your boat when you are

off course.

Review the course indicated by the magenta line.

Follow the magenta line along each leg in the route, steering

to avoid land, shallow water, and other obstacles.

If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line

(direct course).

Deleting a Saved Route

Select User Data > Routes.

Select a route.

Select Delete.

Deleting All Saved Routes

Select User Data > Manage Data > Clear User Data >

Routes.

Tracks

A track is a recording of the path of your boat. The track

currently being recorded is called the active track, and it can be

saved. You can show tracks in each chart or 3D chart view.

Showing Tracks

Select User Data > Tracks > Tracks.

A trailing line on the chart indicates your track.

Clearing the Active Track

Select User Data > Tracks > Clear Active Track.

The track memory is cleared, and the active track continues

to be recorded.

Saving the Active Track

The track currently being recorded is called the active track.

Select User Data > Tracks > Save Active Track.

Select an option:

• Select the time the active track began.

• Select Entire Log.

Viewing a List of Saved Tracks

Select User Data > Tracks > Saved Tracks.

Editing a Saved Track

Select User Data > Tracks > Saved Tracks.

Select a track.

Select Edit Track.

Select an option:

• Select Name, and enter the new name.

• Select Track Color, and select a color.

Saving a Track as a Route

Select User Data > Tracks > Saved Tracks.

Select a track.

Select Edit Track > Save As > Save as Route.

Browsing for and Navigating a Recorded Track

Before you can browse a list of tracks and navigate to them, you

must record and save at least one track (Saving the Active

Track, page 10).

Select User Data > Tracks > Saved Tracks.

Select a track.

Select Follow Track.

Select an option:

• To navigate the track from the starting point used when

the track was created, select Forward.

• To navigate the track from the destination point used

when the track was created, select Backward.

Review the course indicated by the colored line.

Follow the line along each leg in the route, steering to avoid

land, shallow water, and other obstacles.

Deleting a Saved Track

Select User Data > Tracks > Saved Tracks.

Select a track.

Select Delete.

Deleting All Saved Tracks

Select User Data > Manage Data > Clear User Data >

Saved Tracks.

Retracing the Active Track

The track currently being recorded is called the active track.

Select User Data > Tracks > Follow Active Track.

Select an option:

• Select the time the active track began.

• Select Entire Log.

Review the course indicated by the colored line.

Follow the colored line, steering to avoid land, shallow water,

and other obstacles.

Setting the Color of the Active Track

Select User Data > Tracks > Active Track Options > Track

Color.

Select a track color.

Managing the Track Log Memory During Recording

Select User Data > Tracks > Active Track Options.

Select Record Mode.

Select an option:

• To record a track log until the track memory is full, select

Fill.

• To continuously record a track log, replacing the oldest

track data with new data, select Wrap.

Configuring the Recording Interval of the Track Log

You can indicate the frequency at which the track plot is

recorded. Recording more frequent plots is more accurate but

fills the track log faster. The resolution interval is recommended

for the most efficient use of memory.

Select User Data > Tracks > Active Track Options >

Record Intervals > Interval.

Select an option:

• To record the track based on a distance between points,

select Distance > Change, and enter the distance.

• To record the track based on a time interval, select Time >

Change, and enter the time interval.

• To record the track plot based on a variance from your

course, select Resolution > Change, and enter the

maximum error allowed from the true course before

recording a track point.

Device Configuration

System Settings

Select Settings > System.

Display: Adjusts the backlight brightness (Adjusting the

Backlight, page 2) and color scheme (Adjusting the Color

Mode, page 2).

10 Device Configuration

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Striker Plus 9 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Striker Plus 9

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info