Bedienungsanleitung Garmin SWIM 2 (Seite 17 von 24) (Englisch)

694116

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Enter the time.

If necessary, select Restart > On to automatically restart the

timer after it expires.

If necessary, select Sounds, and select a type of notification.

Select Start Timer.

Using the Stopwatch

From any screen, hold LIGHT.

Select Stopwatch.

Select START to start the timer.

Select LAP to restart the lap timer .

The total stopwatch time continues running.

Select START to stop both timers.

Select an option.

Save the recorded time as an activity in your history

(optional).

Device Information

Charging the Device

WARNING

This device contains a lithium-ion battery. See the Important

Safety and Product Information guide in the product box for

product warnings and other important information.

NOTICE

To prevent corrosion, thoroughly clean and dry the contacts and

the surrounding area before charging or connecting to a

computer. Refer to the cleaning instructions in the appendix.

Plug the small end of the USB cable into the charging port on

your device.

Plug the large end of the USB cable into a USB charging

port.

Charge the device completely.

Tips for Charging the Device

Connect the charger securely to the device to charge it using

the USB cable (Charging the Device, page 13).

You can charge the device by plugging the USB cable into a

Garmin approved AC adapter with a standard wall outlet or a

USB port on your computer. Charging a fully depleted battery

takes up to two hours.

Remove the charger from the device after the battery charge

level reaches 100%.

Wearing the Device

• Wear the device above your wrist bone.

NOTE: The device should be snug but comfortable. For more

accurate heart rate readings, the device should not move

while swimming or exercising.

NOTE: The optical sensor is located on the back of the

device.

• See Tips for Erratic Heart Rate Data, page 6 for more

information about wrist-based heart rate.

• For more information about accuracy, go to garmin.com

/ataccuracy.

Device Care

NOTICE

Avoid extreme shock and harsh treatment, because it can

degrade the life of the product.

Thoroughly rinse the device with fresh water after exposure to

chlorinated or salt water environments.

Do not use a sharp object to clean the device.

Avoid chemical cleaners, solvents, and insect repellents that can

damage plastic components and finishes.

Always wipe the device dry after cleaning.

Do not store the device where prolonged exposure to extreme

temperatures can occur, because it can cause permanent

damage.

Cleaning the Device

Wipe the device using a cloth dampened with a mild

detergent solution.

Wipe it dry.

After cleaning, allow the device to dry completely.

TIP: For more information, go to www.garmin.com/fitandcare.

Changing the Bands

You can replace the bands with new Garmin Swim 2 bands.

Use a screwdriver to loosen the screws.

Remove the screws.

Gently remove the bands.

Align the new bands.

Replace the screws using the screwdriver.

Device Information 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin SWIM 2 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin SWIM 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info