Bedienungsanleitung Garmin Varia Rearview Radar RTL 510 (Seite 9 von 12) (Englisch)

691281

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

NOTE: Stay 10 m away from other ANT+ sensors while

pairing.

Turn on the Edge device.

From the Sensors menu, select Add Sensor > Search All.

While the Varia device is turned off, hold the device key for 2

seconds to enter pairing mode.

The status LED flashes purple, and the taillight turns on. The

device is in pairing mode for 5 minutes or until you press the

device key.

Select your sensor.

When the sensor is paired with your Edge device, the radar and

bike light status icons appear solid.

Pairing the Taillight with a Compatible

Garmin Watch

This task is for the Forerunner

935, fēnix

5 series, and

vívoactive

3 watches. If your device is not listed, go to

buy.garmin.com.

Bring the watch within range (3 m) of the sensor.

NOTE: Stay 10 m away from other ANT+ sensors while

pairing.

Turn on the Garmin watch.

From the Settings menu, select Sensors & Accessories >

Add New > Search All.

While the Varia device is turned off, hold the device key for 2

seconds to enter pairing mode.

The status LED flashes purple, and the taillight turns on. The

device is in pairing mode for 5 minutes or until you press the

device key.

Select your sensor.

When the sensor is paired with your Garmin watch, the radar

and bike light status icons appear solid.

Troubleshooting

Resetting the Device

You can reset the device if it stops responding.

Hold the device key for 8 seconds until all the LEDs turn off.

Resetting deletes the pairing connections from the device.

Updating the Taillight Software With Your

Edge Device

Before you can update the taillight software, you must pair the

taillight with your Edge device, you must have a Garmin

Connect

™

account, and you must pair the Edge device with a

compatible smartphone.

Bring the Edge device within 3 m (10 ft.) of the taillight.

Sync your Edge device with the Garmin Connect Mobile app.

When new software is available, your device alerts you to

update the software.

Follow the on-screen instructions.

The taillight LED flashes blue and green to indicate the device is

updating. When the update is complete, the LED flashes green

ten times.

Taillight Status LED for Software Updates

LED Activity Status

Flashing blue and green The device is uploading software.

Flashing green The software update is complete and

successful.

Flashing red The software update failed.

Product Updates

On your computer, install Garmin Express

™

(www.garmin.com

/express).

This provides easy access to these services for Garmin devices:

• Software updates

• Product registration

Updating the Software Using the Garmin Express

Application

Before you can update your device software, you must

download the Garmin Express application.

You can update the taillight software using the Garmin Express

application.

Connect the taillight to your computer using the USB cable.

Garmin Express looks for software updates automatically and

sends them to your device.

Follow the on-screen instructions.

Disconnect the device, and turn it on.

The taillight LED flashes blue and green to indicate the

device is updating. When the update is complete, the LED

flashes green ten times.

The taillight disconnects from the Edge

device

WARNING

If the taillight is not connected or sending light and radar data to

the Edge device, Garmin recommends that you stop riding and

check the devices in a safe location.

• Turn both devices off, and turn them back on.

• Pair the devices (Pairing the Taillight with Your Edge 1030,

page 2).

The Varia RTL device sends light and radar data to the Edge

device. The Edge device displays and when

connected.

The taillight is not responding

During a ride, if the taillight status LED is solid red, the device is

in an error state.

• Make sure the device is within the approved operating

temperature range (Varia RTL Specifications, page 3).

• Turn the device off, and turn it back on.

You can check the battery level on the Sensors menu of your

Edge device.

• Avoid multiple sources of radar interference.

Radar detection does not work indoors

The Varia RTL device is tuned to detect vehicles in an outdoor

setting. If you turn on the device indoors, a saturation alert can

occur. When you take the device outdoors, the device resumes

normal operation.

The status LED turns red while charging

• Check the USB cable, connectors, and ports for damage.

• Make sure the power source is generating power.

You can check this several ways. For example, you can

check whether other devices powered by the source are

functioning.

• Make sure the device is within the approved charging

temperature range (Varia RTL Specifications, page 3).

Troubleshooting 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Varia Rearview Radar RTL 510 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Varia Rearview Radar RTL 510

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info